|
The Phoenix 27” Education Model is perfect for use in schools and offices. Its tabletop design is great for small working areas. This machine will efficiently laminate any size document up to 27” in width.
Designed for preserving and enhancing larger size documents, a roll laminator can help you to laminate a large poster or several smaller items. It is a cost effective solution for your school, office, copy or print shop to laminate with 1.5 mil or 3.0 mil, 1” or 2-1/4” core laminating film!
With this roll laminating machine being used in schools and larger sized offices, we realize that safety is of the utmost importance. That is why the Phoenix roll laminator includes the latest in safety innovations and energy saving technology! Safety measures include safety latches on feed tray and safety shield preventing the unit from running if they are not in place. Also, when the machine has been idle for 1/2 hour, a standby mode will activate and the temperature drops into an auto sleep mode. After 3 hours of being idle, the heaters turn off.
Max. Laminate Thickness: | 3 Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 6 feet/minute |
Slitters: | No |
Core Size(s): | 1" and 2-1/4" |
Speed Control: | Yes |
Warranty: | 1 Year |
Power: | 120 VAC, 60 Hz, 13.3 Amps (1600 Watts) |
Size: | 36.5”W x 16”H x 18”D |
Shipping Weight: | 135 Pounds |
![]() Versalam-2700 HC Roll Laminator $3,999.00 |
![]() Producto Pad Padding Press $439.00 |
![]() Pad About Padding Press $599.00 |
![]() HF200 Simplimatic Paper Folder $899.00 |
HR 3800 Slitter Assembly $299.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x Ideal Triumph 3905 Cutting Knife | $228.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x ONYX HD8370 Insert-A-Bind Wire Inserter/Closer | $1,729.00 |
1 x WirePro 101 3:1 Wire Punch & Bind Machine | $189.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Pillar | $6.08 |
1 x BEARING, FLANGE FC-SCM-204 | $932.30 |
1 x 25" x 500' 1.7 Mil Low Melt Laminating Roll Film | $134.34 |
1 x DC Motor Assy/DP-U Series | $159.35 |
1 x 1162 BOARD BLADE | $66.80 |
1 x FLAT BELTS N4-K1021-01 | $54.28 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 29000255015 ADJ DISC | $87.65 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x SHIM, 3.0MM, WITH FLAT | $474.06 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x LATCH, SPRING | $68.08 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x NONSTK-#3 E.RING | $20.44 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x ACTUATOR 11A-21260 | $22.10 |
1 x CAP 20 UF 400 V 047680017 | $68.26 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x Martin Yale W24 24" Paper Cutting Machine | $334.99 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x Wohlenberg 42" Pacemaker II Cutting Knife | $582.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x MK7 230VAC JUMPER WIRE | $45.60 |
1 x DIE ASSY (7 PUNCH) | $374.55 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x Plastic Luggage Strap | $19.95 |
1 x Heavy Duty Hand Slot Punch | $59.95 |