|
The 12" PL-1200HP is a cost effective yet high performance laminating machine. It not only produces a superb finish and edge seal, but it is also capable of speeds up to 17 feet per minute on 1.5 Mil material and up to 10 feet per minute on 3 Mil. It accepts films from 1 to 10 Mil thick and will laminate materials such as foam board up to 1/4" thick. The PL-1200HP sets up in minutes and has a thru-put capability in excess of 1000 feet per hour.
The PL-1200HP features a patented heated roller design for fast, high quality lamination. This laminator handles a wide variety of laminating projects, using polyester, polypropylene, nylon, vinyl, and other film, both hot and cold.
Max. Laminate Thickness: | 10 Mil Mills |
Max. Laminate Width: | 12 inch inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 18 feet per minute feet/minute |
Slitters: | Two included |
Core Size(s): | 3 inch |
Temp. Control: | Digital solid state |
Laminate/Mount Thickness: | 1/4 inch |
Speed Control: | Digital solid state |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 Volt, 60 Hz, 1900 Watts - 20 Amp dedicated circuit required |
Size: | 23" W x 20" D x 16" H without stand (40" H with stand) |
Shipping Weight: | 129 pounds Pounds |
![]() GBC Catena 65 Hot & Cold 25" Roll $4,095.00 |
![]() CombMac-24E Electric Comb Binding $1,395.00 |
![]() Onyx HD7700 Ultima Punch For Wire, $4,634.00 |
![]() Onyx OD4012 Heavy Duty Electric $2,574.00 |
![]() TCC-1400i 14" Roll Laminator $1,014.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x Office Duty Manual Corner Rounding Machine | $169.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Caps | $64.46 |
1 x Pilot Light | $17.96 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x Collar/DC-745 | $32.28 |
1 x Lassco Spinnit FMM-3 Three Spindle Paper Drill | $8,250.00 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Martin Yale 376B Cutting Knife | $119.00 |
1 x 15/16" SB-35 Bostitch type staples | $9.49 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x D846 Heavy Duty Manual Paper Cutter | $1,779.00 |
1 x PH1250M 12.5" Manual Stack Cutter | $395.00 |
1 x DISCONTNUED Lassco Spinnit FMMP-3 Three Spindle Paper Drill | $5,299.00 |
1 x Idler | $15.73 |
1 x TBD - TRU-ARC RETAINER RIN | $23.68 |
1 x 12" x 500' 1.7 Mil Low Melt Laminating Roll Film | $64.52 |
1 x Glue Scraper Plate/DB-280 | $76.82 |