|
The 12" PL-1200HP is a cost effective yet high performance laminating machine. It not only produces a superb finish and edge seal, but it is also capable of speeds up to 17 feet per minute on 1.5 Mil material and up to 10 feet per minute on 3 Mil. It accepts films from 1 to 10 Mil thick and will laminate materials such as foam board up to 1/4" thick. The PL-1200HP sets up in minutes and has a thru-put capability in excess of 1000 feet per hour.
The PL-1200HP features a patented heated roller design for fast, high quality lamination. This laminator handles a wide variety of laminating projects, using polyester, polypropylene, nylon, vinyl, and other film, both hot and cold.
Max. Laminate Thickness: | 10 Mil Mills |
Max. Laminate Width: | 12 inch inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 18 feet per minute feet/minute |
Slitters: | Two included |
Core Size(s): | 3 inch |
Temp. Control: | Digital solid state |
Laminate/Mount Thickness: | 1/4 inch |
Speed Control: | Digital solid state |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 Volt, 60 Hz, 1900 Watts - 20 Amp dedicated circuit required |
Size: | 23" W x 20" D x 16" H without stand (40" H with stand) |
Shipping Weight: | 129 pounds Pounds |
Velobind 520 $0.00 |
Velobind 510 $0.00 |
![]() Attabind 70 Thermal Binder $0.00 |
RELAY, 115VAC $0.00 |
![]() Utility Workstation $0.00 |
1 x NONSTK-UPPER HOUSING,GL-4 | $47.35 |
1 x TAPER BUSHING BORE 1-5/8 1610 | $55.60 |
1 x Separation Roller | $75.94 |
1 x HTSHOE CVR PLSTC W PRNT DISCONTINUED | $45.84 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x 13" Knife Guard | $26.00 |
1 x NONSTK-FRONT LABEL STICKER | $20.65 |
1 x Cutting Line Light=9SR-490/L1 | $74.10 |
1 x 18" Knife Guard | $36.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x MBM Triumph 5255 20 3/8 inch Fully Automatic Paper Cutter | $14,359.00 |
1 x O-RING-LRG-ROLLER >USE 0750109600 | $26.26 |
1 x Pilot Light | $17.96 |
1 x Pro Cut 265 Cutting Knife | $239.00 |
1 x Dahle 550 14-1/8" Rotary Cutter | $179.00 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x Micro Switch/DC-645 | $41.63 |
1 x Pressure Sensitive Pin | $24.95 |
1 x PBPro 201 Plastic Comb Binding Machine | $299.00 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x Hoerauf 135A Top Left Cutting Knife | $354.00 |
1 x Passport Die Cutter | $105.00 |
1 x 1/2" Solid Brass Screw Posts (10 Sets) | $28.01 |
1 x SQUARE KEY | $23.68 |
1 x VeloBind System 1 / GBC V800Pro | $2,199.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |