|
The 12" PL-1200HP is a cost effective yet high performance laminating machine. It not only produces a superb finish and edge seal, but it is also capable of speeds up to 17 feet per minute on 1.5 Mil material and up to 10 feet per minute on 3 Mil. It accepts films from 1 to 10 Mil thick and will laminate materials such as foam board up to 1/4" thick. The PL-1200HP sets up in minutes and has a thru-put capability in excess of 1000 feet per hour.
The PL-1200HP features a patented heated roller design for fast, high quality lamination. This laminator handles a wide variety of laminating projects, using polyester, polypropylene, nylon, vinyl, and other film, both hot and cold.
Max. Laminate Thickness: | 10 Mil Mills |
Max. Laminate Width: | 12 inch inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 18 feet per minute feet/minute |
Slitters: | Two included |
Core Size(s): | 3 inch |
Temp. Control: | Digital solid state |
Laminate/Mount Thickness: | 1/4 inch |
Speed Control: | Digital solid state |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 Volt, 60 Hz, 1900 Watts - 20 Amp dedicated circuit required |
Size: | 23" W x 20" D x 16" H without stand (40" H with stand) |
Shipping Weight: | 129 pounds Pounds |
![]() Ideal/MBM 508A Automatic Folder $6,399.00 |
![]() PF-P3200 Paper Folder $5,265.00 |
![]() CBX-100 Automatic Heavy Duty $5,795.00 |
![]() Versalam-2700 HC Roll Laminator $3,999.00 |
![]() Onyx HD6500 Comb, Wire, & Spiral $3,398.00 |
1 x REWIND TUBE T-165 810500068 | $65.30 |
1 x FORM BELT BRACKET | $21.97 |
1 x T/S & FORM BASE | $377.00 |
1 x WIRE, 14 GA, BLACK | $20.69 |
1 x ONE 690025 ROLL / 870005 CRATE | $5,610.00 |
1 x 1/4" Long Handle Hole Punch | $79.95 |
1 x EBA 10/720 Cutting Knife | $431.00 |
1 x BUMPER-STEM USE 0147003000 | $20.72 |
1 x 10T MTR PULLEY,5100 USE NEW# WRO501012 | $101.62 |
1 x PULLEY TIMING | $47.88 |
1 x SPACE PIN(PL) | $20.44 |
1 x SPRING EXT 7/16X.037X1-1/4 | $23.68 |
1 x FUSE 1/2 AMP | $20.52 |
1 x NONSTK-ROLL PIN, 7/32 X 1-1/8 | $22.93 |
1 x Super Pad Pro Padding Press DISCONTINUED | $699.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x BINDER ASSY >USE 7703564 DISCONTINUED | $117.51 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x NONSTK-PIN GROOVE .125X1.00 | $20.05 |
1 x 4705 18-3/4 Inch Manual Paper Cutter | $3,639.00 |
1 x ONE 690025 ROLL / 870005 CRATE | $6,626.81 |
2 x Padding Kit | $91.90 |
1 x BLOCK WEAR PAD | $9.77 |
1 x TENSION ROLLER PIN(PL) | $20.44 |
1 x UltraPhoto 13 Photo Pouch Laminator | $699.00 |
1 x XHC-150 Extra Heavy-Duty 3 Hole punch | $179.95 |
1 x Martin Yale 376B Cutting Knife | $119.00 |
1 x SLIP RING, 3-CONTACT, 20 AMP | $977.77 |
1 x Spring C/AF-100 | $27.27 |