|
The GBC Catena 65 Hot & Cold 25" Roll Laminator laminates, mounts and encapsulates you color prints. It uses roll laminating film 1.5"mil to 10mil thick and up to 25 inches wide. The Roll laminators silicon rollers ensure a smooth scratch free lamination of all your prints.
Max. Laminate Thickness: | 10 Mills |
Max. Laminate Width: | 25 inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5 Feet Per Minute feet/minute |
Core Size(s): | 1" and 2.25" |
Temp. Control: | Yes |
Laminate/Mount Thickness: | 3/16" |
Speed Control: | Yes |
Reverse Switch: | Yes |
Warranty: | 90 Day Manufacturer |
Power: | 120V, 12 Amps, 60 Hz |
Size: | 39" W x 17" H x 18" D |
Shipping Weight: | 135 Pounds |
![]() Phoenix 2700-DHP Dual Heat $2,549.00 |
![]() Phoenix 2700-DH Dual Heat $1,405.00 |
![]() Versalam-2700 HC Roll Laminator $3,999.00 |
![]() Producto Pad Padding Press $439.00 |
![]() Pad About Padding Press $599.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x Ideal Triumph 3905 Cutting Knife | $228.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x ONYX HD8370 Insert-A-Bind Wire Inserter/Closer | $1,729.00 |
1 x WirePro 101 3:1 Wire Punch & Bind Machine | $189.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Pillar | $6.08 |
1 x BEARING, FLANGE FC-SCM-204 | $932.30 |
1 x 25" x 500' 1.7 Mil Low Melt Laminating Roll Film | $134.34 |
1 x DC Motor Assy/DP-U Series | $159.35 |
1 x 1162 BOARD BLADE | $66.80 |
1 x FLAT BELTS N4-K1021-01 | $54.28 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 29000255015 ADJ DISC | $87.65 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x SHIM, 3.0MM, WITH FLAT | $474.06 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x LATCH, SPRING | $68.08 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x NONSTK-#3 E.RING | $20.44 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x ACTUATOR 11A-21260 | $22.10 |
1 x CAP 20 UF 400 V 047680017 | $68.26 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x Martin Yale W24 24" Paper Cutting Machine | $334.99 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x Wohlenberg 42" Pacemaker II Cutting Knife | $582.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x MK7 230VAC JUMPER WIRE | $45.60 |
1 x DIE ASSY (7 PUNCH) | $374.55 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x Plastic Luggage Strap | $19.95 |
1 x Heavy Duty Hand Slot Punch | $59.95 |
1 x Roll Laminator Cleaning Kit | $62.95 |
1 x Roll Laminator Cleaning Kit
This product has been added to your cart.
For more information, click on the Cart button at the top of the page.