|
The GBC Catena 65 Hot & Cold 25" Roll Laminator laminates, mounts and encapsulates you color prints. It uses roll laminating film 1.5"mil to 10mil thick and up to 25 inches wide. The Roll laminators silicon rollers ensure a smooth scratch free lamination of all your prints.
Max. Laminate Thickness: | 10 Mills |
Max. Laminate Width: | 25 inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5 Feet Per Minute feet/minute |
Core Size(s): | 1" and 2.25" |
Temp. Control: | Yes |
Laminate/Mount Thickness: | 3/16" |
Speed Control: | Yes |
Reverse Switch: | Yes |
Warranty: | 90 Day Manufacturer |
Power: | 120V, 12 Amps, 60 Hz |
Size: | 39" W x 17" H x 18" D |
Shipping Weight: | 135 Pounds |
![]() CombMac-24E Electric Comb Binding $1,395.00 |
![]() Onyx HD7700 Ultima Punch For Wire, $4,634.00 |
![]() Onyx OD4012 Heavy Duty Electric $2,574.00 |
![]() TCC-1400i 14" Roll Laminator $1,014.00 |
![]() Pad About Padding Press $599.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x Office Duty Manual Corner Rounding Machine | $169.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Caps | $64.46 |
1 x Pilot Light | $17.96 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x Collar/DC-745 | $32.28 |
1 x Lassco Spinnit FMM-3 Three Spindle Paper Drill | $8,250.00 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Martin Yale 376B Cutting Knife | $119.00 |
1 x 15/16" SB-35 Bostitch type staples | $9.49 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x D846 Heavy Duty Manual Paper Cutter | $1,779.00 |
1 x PH1250M 12.5" Manual Stack Cutter | $395.00 |
1 x DISCONTNUED Lassco Spinnit FMMP-3 Three Spindle Paper Drill | $5,299.00 |
1 x Idler | $15.73 |
1 x TBD - TRU-ARC RETAINER RIN | $23.68 |
1 x 12" x 500' 1.7 Mil Low Melt Laminating Roll Film | $64.52 |
1 x Glue Scraper Plate/DB-280 | $76.82 |