|
The DC-210N is a heavy duty 36 sheet rotary paper trimmer, perforator, and scorer. It cuts cardstock, artist board, plastic sheets and more. The patented locking rail mechanism and luminous paper holder is made of acrylic that pipes light to the cutting line, making cutting easy and accurate.
Paper Size: | 12" |
Maximum Paper Weight: | 22 Sheets |
Paper Feed: | Hand |
Numbering: | No |
Perforating: | Yes |
Scoring: | Optional |
Counter: | No |
Warranty: | Limited Lifetime Warranty (excluding blades and cutting mats). |
Power: | Manual |
Size: | 4" x 14.5" x 22" |
Weight: | 7.4 Pounds |
1/2" Lawson / Miller HFD / Baum RB $29.79 |
72" (180cm) Safety Straight Edge $197.00 |
Lawson 52" Pacemaker IV Cutting $750.00 |
Lawson 52" Pacemaker I Cutting $758.00 |
42" (105cm) Safety Straight Edge $131.00 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Pilot Light | $17.96 |
1 x Foldup 4" Wall Mount Literature Holder | $84.00 |
1 x ASSEMBLY, REMVBLE IDLER W/STAN | $1,496.14 |
1 x Clutch Unit | $92.91 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x Heavy Duty Hand Slot Punch | $59.95 |
1 x CR828 Semi-Automatic Creaser | $1,195.00 |
1 x Badge Reels | $2.95 |
1 x Passport Die Cutter | $105.00 |
1 x Coil Crimper Pliers | $29.99 |
1 x Zippy Cutter | $9.95 |
1 x Speedy-Lam 330R-10 10 Roller Pouch Laminator | $1,295.00 |
2 x Pressure Sensitive Clip | $39.90 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x 18" (45cm) Safety Straight Edge | $84.30 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x 62359 Stand, Waste Catcher & Roll Feeder Package for 120” Sabre Series 2 | $1,698.00 |
1 x SLIDE F.BOLT 2551110 | $23.68 |
1 x ML-9 9" Pouch Laminator | $299.00 |
1 x Business Card Pockets | $4.49 |
1 x HOUSING, SIPLICITY BEARING #PB | $275.31 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x Powerhouse PF17A Auto Paper Folder | $2,249.95 |
1 x RUBBER KEY S/W U-65 637400077 | $49.51 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x TCC-1200 Wide Format 45" Roll Laminator | $8,499.00 |
1 x NONSTK-INDICATOR LIGHT,RED,24V | $48.74 |
1 x PAPER SEPRTR >USE T12H26070 | $56.17 |
1 x CAP BEARING MOLDED | $35.22 |
1 x Photo Microsensor (KI1234-AALF)/DC615 | $51.22 |
1 x #214 SILICONE O-RING | $8.16 |
1 x NONSTK-ASSEMBLY,CHAIN TENSIONER | $987.26 |
1 x Plastic Luggage Strap | $19.95 |
1 x 62351 Stand, Waste Catcher & Roll Feeder Package for 40” Sabre Series 2 | $1,125.00 |
1 x Take One Coupon Clip | $376.00 |
1 x CRADLE BUSHING | $283.70 |
1 x CAPSTAN ROLLER GRIND | $120.22 |
1 x 62361 36" Stand for 40” Sabre Series 2 | $553.50 |
1 x MBM BC12 12up Business Card Cutter | $5,399.00 |
1 x 4" Screw Lock Rings | $29.47 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x DOUBLE DRIVE GEAR 2601062 DISCONTINUED | $110.71 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x MICHRO ADJUST ROD | $515.14 |
1 x 7" Easel Backs | $31.95 |
1 x 5" x 12" Paper Cutter Jogging Block | $84.00 |
1 x Pulley Unit | $25.95 |
1 x Binding Workstation | $219.00 |
1 x CR818 Manual Creaser | $620.00 |
1 x MENU SIZE (3 MIL) RF | $197.23 |
1 x Refill No.500 Staples (DC-S4, DFC-S, DBM-80H, AR-F15) | $129.60 |
1 x Finned Price Rail Flag Holder | $85.95 |
1 x HS-3000-GC Gutter Cut Business Card Slitter DISCONTINUED | $3,995.00 |
1 x Count Complete Perfing Assembly | $299.85 |
1 x Nylon Secure Tack | $13.50 |
1 x C900 ultra heavy duty coin counter and sorter | $1,389.95 |
1 x ECP13 Electric Perforator & Creaser | $1,799.00 |
1 x ROLLER BEARING, HEAT | $63.26 |
1 x Leather Luggage Strap | $45.50 |
1 x HOSE,TFLN 18LG 091.00118.01 | $72.30 |
1 x Finned Saddle Clip | $37.95 |
1 x Removable Strap Clip | $15.95 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x Table Top Slot Punch with Guide | $27.95 |
1 x ID Photo Die Cutter | $289.00 |
1 x UltraPhoto 13 Photo Pouch Laminator | $699.00 |
1 x 6mm Euro Standard Hollow Drill Bit | $44.98 |
1 x GEAR 20T | $20.31 |
1 x PHOTO MICRO SENSOR 9CA.037 | $139.48 |
1 x 62358 Stand, Waste Catcher & Roll Feeder Package for 100” Sabre Series 2 | $1,598.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x GUARD, IDLER | $489.43 |
1 x 15T Gear DC-8 Micro | $27.46 |
1 x Foldup 5" Wall Mount Literature Holder | $92.00 |
1 x LATCH, SPRING | $68.08 |
1 x Free Standing Kit for 63" Excalibur Series | $292.50 |
1 x Snap-apart Spiral Sign Holder | $139.50 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Main Motor | $715.53 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x C500 heavy duty coin counter and off-sorter | $549.95 |
1 x PULL ROLL SPUR GEAR 627601 | $24.96 |
1 x PULL ROLL SPUR GEAR 627601
This product has been added to your cart.
For more information, click on the Cart button at the top of the page.