|
NEW! The new Martin Yale CR828 is the easiest creaser to use yet. Just unpack the machine, plug it in, adjust the paper stops, and you're ready to go.
Paper Size: | 14" x 18.2" |
Maximum Paper Weight: | 341 GSM 130# Cover 16 (0.016”) Point |
Paper Feed: | Hand |
Numbering: | No |
Perforating: | No |
Scoring: | Yes |
Counter: | No |
Power: | 120V, 60 Hz |
Size: | 7" x 24” x 20" |
Weight: | 33.5 Pounds |
FD 340 Paper Folder $0.00 |
YOKE $0.00 |
42" Rotatrim Rotary Paper Cutter $639.00 |
MBM 4225-EP 16-7/8 inch Digital $0.00 |
Thermal Bind 200 TB Thermal Binder $0.00 |
1 x TBD - CUPPED RIBBON CABLE QO3100 | $113.58 |
1 x NONSTK-LED PCB ASSY | $21.83 |
1 x ROLLER SUPPORTER SPRING | $20.05 |
1 x NONSTK-UPPER MEMBRANE END CAP-RH | $17.55 |
1 x POTENTIOMETER F/352SA - NLA | $171.67 |
1 x BELT, F/INFEED TRANSPORT DISCONTINUED | $234.55 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x POLY FLEX BELT, IB.#22824 | $73.74 |
1 x PL244WF 44" Wide Format Roll / Mounting Laminator | $4,999.00 |
1 x PUNCHING KNIFE SGMT.IB#2559029 | $50.35 |
1 x SNAP SWITCH | $38.19 |
1 x 22.5" Knife Guard | $45.00 |
1 x Phoenix 44" Wide Format Mounting Laminator | $7,095.00 |
1 x Model 140 Stock Truck DISCONTINUED | $510.00 |
1 x SLIDE F PRE-REGULAT.IB#2558310 | $21.45 |
1 x 21" Knife Guard | $42.00 |
1 x NONSTK-BASE GL-4 | $47.35 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x KEY SHORT | $44.94 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x LJ-6 Paper Jogger | $1,265.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 122-TOOTH DRIVE GEAR | $194.58 |
1 x Micro Switch (VX-52-1A3)/DC615,645 | $29.96 |
1 x Clutch Spring | $11.14 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x Hoerauf 135A Top Right Cutting Knife | $354.00 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |