|
The MBM 508A is a dependable automatic folder that comes pre-programmed with 36 standard folds. Up to 24 custom jobs can be stored in memory.
Setup: | Manual |
Minimum Paper Size: | 3.5" x 5" |
Maximum Paper Size: | 11" x 17" |
Minimum Paper Weight: | 12 |
Maximum Paper Weight: | 80 |
Folding Speed: | Up to 14,400 Sheets per Minute |
Fold Types: | custom |
Fold Types: | double |
Fold Types: | engineering |
Fold Types: | Z |
Fold Types: | gate |
Fold Types: | trifold |
Fold Types: | half |
Fold Types: | cross |
Paper Input Capacity: | 500 Sheets of 20# |
Paper Feed: | Friction |
Fold Sets: | No |
Page Counter: | Yes |
Power: | 115 V, 60 Hz |
Size: | 39.75" x 21.5" x 19.7" |
Shipping Weight: | 82 Pounds |
![]() Omni 532 Bottom Front Cutting $438.00 |
![]() 9/32" Baum/Nygreen Dahly Hollow $30.79 |
![]() Shelf Push Pins $49.50 |
![]() 3/8" Challenge/Lassco Drill Bit $29.69 |
![]() 3/16" Challenge/Lassco Drill Bit $29.69 |
1 x SOLENOID VAVVE CPE14-M1BH- | $318.94 |
1 x 5" Screw Lock Rings | $32.89 |
1 x SHAFT, UPPER PILE TABLE LIFT | $2,417.46 |
1 x NIP,8500 | $8,261.20 |
1 x 8" Screw Lock Rings | $50.16 |
1 x Omni 532 Top Side Cutting Knife | $134.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
2 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $1,332.00 |
1 x THERMAL CUT-OFF 9X186 | $104.36 |
1 x 2 Year Worry Free Guarantee (c) | $79.99 |
1 x Cut HP Relay Cable Unit/DC-645 DISCONTINUED | $272.44 |
1 x Textile Blade Holder | $85.50 |
1 x 2 Year Worry Free Guarantee (b) | $59.99 |
1 x UltraPhoto 13 Photo Pouch Laminator | $699.00 |
1 x Simplex 44" Cutter Bar (SIM110) | $604.80 |
1 x 9" Countertop Literature Holder | $139.50 |
1 x 15/16" SB-35 Bostitch type staples | $9.49 |
1 x Fold-up 4" Countertop Literature Holder | $22.95 |
1 x Foldup 5" Wall Mount Literature Holder | $92.00 |
1 x Graphik D .017 Blades | $82.80 |
1 x GUIDE-BOTTOM | $304.81 |
1 x 60952 Evolution 2 Bench for the 104" Evolution E2 | $994.50 |
1 x ML-13 13" Pouch Laminator | $329.00 |
1 x Wohlenberg 42" Pacemaker II Cutting Knife | $582.00 |
1 x FD 390 Paper Folder | $8,350.00 |
1 x Proteus Workbench For 84" Javelin Integra | $702.00 |
1 x BLANK CHUTE TOP | $54.46 |
1 x OLFA 45mm Textile Blades | $150.00 |