|
The Lassco Spinnit FMMH 3.1 Fully Automatic Hydraulic Three Spindle Paper Drill is easy to use and is built for maximum production performance. It can drill up to 2.5" with the simple press of the foot pedal. The FMMH 3.1 is full of features to make your paper drilling projects fast and easy.
Warranty: | 1 Year limited |
Power: | 3/4 HP, 115 Volts |
Size: | 54" x 32" x 31" |
Shipping Weight: | 460 Pounds |
![]() Lassco Spinnit FM-2 $3,235.00 |
![]() SmartLam 12 inch Pouch Laminator $0.00 |
Javelin 60" Utility Cutter $0.00 |
Velobind 520 $0.00 |
![]() HeatSeal Sprint H950 Fully $0.00 |
1 x Phoenix 2700-DH Dual Heat Laminator — Education Model | $1,405.00 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x TBD - CUPPED RIBBON CABLE QO3100 | $113.58 |
1 x NONSTK-DEFEATURED CHIP20201V70535 | $658.20 |
1 x 5" Easel Backs | $29.95 |
1 x DF 915 Paper Folder DISCONTINUED | $4,500.00 |
1 x 6600 series remote display DISCONTINUED | $24.95 |
1 x Cassida CleanPRO complete care kit for currency counters | $36.95 |
1 x STRIPPING DEVICE 02572720 | $23.17 |
1 x CLUTCH PULLEY FOR INTERFACE | $211.24 |
1 x Cassida CleanPro air duster | $49.95 |
1 x TBD - MICROPRCSSR Z-705 | $850.62 |
1 x Graphik D .017 Blades | $82.80 |
1 x Book Clamps | $39.95 |
1 x SPACER, BEARING | $22.10 |
1 x PL-1200HP 12 in. High Performance Laminator | $2,895.00 |
1 x Superior Quality 0.080 Utility Blades | $54.00 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x 60954 Evolution 2 Bench for the 144" Evolution E2 | $1,296.00 |
1 x 4" x 12" Paper Cutter Jogging Block | $75.00 |
1 x 18" I Bar Shrink Wrap Sealer | $399.00 |
1 x RM-12/4 (12") Cutting Mat (4 Pack) | $20.38 |
2 x K-30 Replacement Scoring Blade | $13.20 |
1 x 1/4" SB-35 Bostitch type staples | $5.99 |
1 x Perfmaster Air V3 Perforating and Scoring Machine | $11,099.00 |
1 x Link | $11.21 |
1 x BASE LT BAR SPRT | $15.58 |
1 x SCREW (B-SEM M3X12) F/BC12 | $12.59 |
1 x 1/4X3/8X.17ID SPACER | $3.43 |
1 x TBD - INFRD SNSR WHT LBL NON ROHS | $364.82 |
1 x 5" x 16" Paper Cutter Jogging Block | $110.00 |
1 x Metal Loop Hangers | $59.50 |
1 x MICHRO ADJUST ROD | $515.14 |
1 x Horizon PC64 Cutting Sticks | $81.00 |
1 x P/C CATCH TRAY-ON 1611 LINE DISCONTINUED D | $36.00 |
1 x Paper Receiving Tray DC-8 Micro | $64.64 |
1 x DC-210N Perf & Score Cutter | $179.00 |
1 x CLAMP HANDLE 1GLV0019701AA | $132.95 |
1 x BLANK CHAD DIVERTER | $23.87 |
1 x Proteus Workbench For 124" Javelin Integra | $972.00 |
1 x Bind base | $53.38 |
1 x O-RING 4004583-00 | $27.81 |
1 x Clear - No Stripe Copier Transparencies | $24.95 |
1 x Flat Belt | $53.87 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x PUNCH PIN 5/32 SQ. 3-1 | $89.84 |
1 x B/O FEED SHAFT | $62.28 |
1 x K-29 Replacement Perforation Blade | $13.20 |