|
The Lassco Spinnit FMM-3 Three Spindle Paper Drill can drill up to 2" of paper.
Warranty: | 1 Year Manufacturer Warranty |
Power: | 115 Volt |
Size: | 15" x 15" x 51" |
Shipping Weight: | 292 lbs. Pounds |
1" Colored Aluminum Screw Posts $38.96 |
Omni 532 Bottom Front Cutting $438.00 |
7mm Euro Standard Hollow Drill Bit $24.98 |
Lassco Spinnit FMMH 3 Fully $9,950.00 |
3" Colored Aluminum Screw Posts $82.07 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x Office Duty Manual Corner Rounding Machine | $169.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Caps | $64.46 |
1 x Pilot Light | $17.96 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x Collar/DC-745 | $32.28 |
1 x Lassco Spinnit FMM-3 Three Spindle Paper Drill | $8,250.00 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Martin Yale 376B Cutting Knife | $119.00 |
1 x 15/16" SB-35 Bostitch type staples | $9.49 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x D846 Heavy Duty Manual Paper Cutter | $1,779.00 |
1 x PH1250M 12.5" Manual Stack Cutter | $395.00 |
1 x DISCONTNUED Lassco Spinnit FMMP-3 Three Spindle Paper Drill | $5,299.00 |
1 x Idler | $15.73 |
1 x TBD - TRU-ARC RETAINER RIN | $23.68 |
1 x 12" x 500' 1.7 Mil Low Melt Laminating Roll Film | $64.52 |