|
The FP-IVT is a table top 3 spindle drill with a drilling capacity of up to 2 1/2". The center head is fixed and the outer two heads are adjustable from 2 1/4" to 4 3/4". The table has self centering guides for the placement of paper. Paper size ranges from 3 1/2" to 17" wide. Back margin is adjustable up to a 3 1/2" depth. Table size is 18 1/4" x 14 3/8". Paper drills are available from 1/8" (3mm) to 3/8" (9mm) in diameter.
The FP-IVT is equipped with a moving table that has two stop bars. The first stop bar has adjustable stops so that if drilling jobs with more than 3 holes, this can be set up to accommodate these jobs. The preprogrammed bar has setting for two stops (6 hole) and 12 stops (36 hole).
The FP-IVT has a unique design. the belt driven spindles are powered by three 1/4" horse power motors. As an added safety feature, when the drill head is in the up position, the motor does not run. Power is 110 volts.
Warranty: | 1 Year limited |
Power: | 110 Volts, 60Hz |
Size: | 22-3/8"(H)x 24"(W)x 21.2"(L) |
Shipping Weight: | 145 Pounds |
Suction Cup with Deko Spring $85.49 |
Polar 112 EL Cutting Knife $642.00 |
3/8" Lassco Spinnit® 1" Hollow $30.49 |
11 mm 4:1 Plastic Spiral Coil $13.28 |
CC-10 Handheld Rotary Trimmer $29.50 |
1 x 36" Rotatrim Rotary Paper Cutter | $559.00 |
1 x Stopper/DBM-350 | $71.62 |
1 x WRAPPER, HOIST C-CHANNEL | $551.18 |
1 x Martin Yale W24 24" Paper Cutting Machine | $334.99 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Kutrimmer 1110 43 3/4" Paper Cutting Machine | $2,393.00 |
1 x HEATR HOUSING ASY(UP)638200001 | $119.26 |
1 x TENSION SPRING | $24.36 |
1 x NONSTK-ELBOW MALE 1/4 TO 1/4 NPT | $56.70 |
1 x Kutrimmer 1071 28 1/2" Paper Cutting Machine | $1,220.00 |
1 x Kutrimmer 1038 14 3/4" Paper Cutting Machine | $579.00 |
1 x B/O UPPER EXIT SHAFT | $69.90 |
1 x VBF 135A Top Left Cutting Knife | $354.00 |
1 x TENSION CONTROL FRONT BLOCK | $143.68 |
1 x Count Molded Silicone Gripper Wheel for Upper Assembly | $50.33 |
1 x Perfmaster Air V3 Perforating and Scoring Machine | $11,099.00 |
1 x W630 Score II Perforating & Scoring Machine | $572.00 |
1 x CheckMate Check Jogger | $365.95 |
1 x 9" Wall Mount Literature Holder | $149.50 |
1 x LATCH, SPRING | $68.08 |
1 x C/OFF MOT CPLG DISCONTINUED | $26.46 |
1 x VBF 135A Top Front Cutting Knife | $354.00 |
1 x Polar 115 CE Cutting Knife | $642.00 |
1 x Lightweight 6" Wall Mount Literature Holder | $23.50 |
1 x Foldup 5" Wall Mount Literature Holder | $92.00 |
1 x EBM-2.1 Table-Top Paper Drill | $1,676.00 |
1 x Lightweight 4" Wall Mount Literature Holder | $19.95 |
1 x PCB ACTUATER F/4860ET | $61.39 |
1 x HEAT SENSOR BD 4250 9R011S | $179.32 |
1 x VBF 135A Top Right Cutting Knife | $354.00 |
1 x FP 1XLS Heavy Duty Hole Punch | $349.00 |
1 x 6" Countertop Literature Holder | $119.50 |
1 x Paper Separator | $37.61 |
1 x DISCONTNUED Lassco Spinnit FMMP-3 Three Spindle Paper Drill | $5,299.00 |
1 x LJ-4 Paper Jogger | $1,265.00 |
1 x HEATER, 220V AD | $610.92 |
1 x FLAT BELTS N4-K1021-01 | $54.28 |
1 x HEATER INCOLOY EIN2277 | $435.63 |
1 x THREADED SHAFT W/ GEAR | $131.11 |
1 x 4" Countertop Literature Holder | $49.50 |