|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
1 x Standard 45mm Textile Blades | $25.00 |
1 x Graphik D .017 Blades | $82.80 |
1 x NONSTK-SWITCH RAMP-RH QO3100 | $22.32 |
1 x E65 H/ROLLER>607040513(29 1/4L | $521.18 |
1 x ML-13 13" Pouch Laminator | $329.00 |
1 x DC GEAR MOTOR >USE 609020200 | $384.89 |
1 x ProClick® P210E Electric Binding Machine (01GBC7708180) | $499.00 |
1 x Scoring Blade for Acrylic | $25.00 |
1 x FORM BELT BRACKET | $21.97 |
1 x Seybold 34" Dynaclamp Cutting Knife | $551.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Horizon BQ-160 Perfect Binder | $20,085.00 |
1 x Replacement Punch Head/Disk Set for XHC-150 Punch, 3 9/32 Heads & 6 Disks/set | $53.59 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $697.50 |
1 x 6mm Euro Standard Hollow Drill Bit | $44.98 |
1 x EXIT TRAY P/C | $39.60 |
1 x 3" Screw Lock Rings | $28.95 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x AUTOFEED WHEEL AA1462 FF22 | $88.50 |
1 x NONSTK-LEFT END CAP | $48.76 |
1 x FEED BELT, 62001 | $41.85 |
1 x PB LOGO GEST QB373 | $22.10 |
1 x MTR.BRUSH,LEESON 959 | $66.16 |
1 x RUBBER KEY S/W 637400083 | $54.97 |
1 x 25"x250' 5 mil Digikote Gloss Laminating Film | $194.30 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x GUIDE PLATE#93E-50670 | $21.87 |
1 x Clamp Pads | $57.95 |
1 x DRIVE BELT | $16.70 |
1 x RUBBER WHEEL PDICI30000#30450 | $65.90 |
1 x THERMOSTAT 40-6161DISCONTINUED | $200.78 |
1 x Cutter Knives | $0.00 |
1 x Pouch Laminating Workstation | $219.00 |
1 x Table Top Slot Punch with Guide | $27.95 |
1 x iCoil 41 Manual Coil Punch and Electric Inserter | $308.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x Lamitek PhotoPro 13" Pouch Laminator | $259.00 |
1 x Roll Laminating Workstation | $279.00 |
1 x Pressure Sensitive Pin | $24.95 |
1 x CoilPro ECI Coil Binding Machine | $309.00 |
1 x NONSTK-ASSEMBLY,CHAIN TENSIONER | $987.26 |
1 x Finish @ Coil E1 Coil Inserter with built in Electric Crimper | $699.00 |
1 x CoilPro 2000 ECP+ Coil Binding Machine | $1,481.00 |
1 x Collar/DC-745 | $32.28 |
1 x Spring T/DB-10TR | $10.13 |