|
Make your HD Punch more productive by getting the APES-14! APES stands for Automatic Paper Ejector &Stacker module. With your Rhin-O-Tuff HD punch it will punch, eject and stack in one operation. The APES-14 easily attaches to your HD6500 or HD7000 and handles paper sizes from 5 1/2" X 5 1/2" up to 14" X 14" (140 X 140mm to 356 X 356mm). For the occasional job that it can’t handle you can use your HD Punch in standard mode while the APES-14 is still attached.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Binds Books Up To: | None inches |
Shipping Weight: | 58 Pounds |
CoilPro 2000 EPI+ Coil Binding $1,799.00 |
iCoil 41 Manual Coil Punch and $308.00 |
1/5 Cut Double Reverse Printable $125.00 |
Onyx HD7700 Ultima Punch For Wire, $4,634.00 |
1/5 Cut Single Reverse Printable $125.00 |
1 x PowerHouse PF17 Paper Folder | $999.00 |
1 x Graphik D .017 Blades | $82.80 |
1 x Duplo DF 920 Paper Folder DISCONTINUED | $5,300.00 |
1 x Replacement 28mm Fabric Cutting Wheels | $117.00 |
1 x Scoring Blade for Acrylic | $25.00 |
1 x Ideal/MBM 508A Automatic Folder | $6,399.00 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x RM-12/2 (12") Cutting Mat (2 Pack) | $11.29 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $697.50 |
1 x Multicut 10/710 Cutting Knife | $430.00 |
1 x Excalibur 3S Utility Cutter | $3,800.00 |
1 x SAW REAR TOWER RAIL | $40.93 |
1 x Staplex SU-100N Ultra Heavy Capacity Electric Stapler | $995.00 |
1 x 90007265065 END CAP 40X40 | $22.10 |
1 x Multicut 10/720 Cutting Knife | $430.00 |
1 x Roll Laminator Cart | $469.00 |
1 x Type A Hollow Drill Sharpener | $129.00 |
1 x Speedy-Lam 330R-10 10 Roller Pouch Laminator | $1,295.00 |
1 x FLAT BELT DBM-500-12J-36260 DISCONTINUED | $99.59 |
1 x P/C CATCH TRAY-ON 1611 LINE DISCONTINUED D | $36.00 |
1 x HOLE COVER STICKER(LOW) | $23.68 |
1 x SteelTraK 65" Utility Cutter | $5,060.00 |
1 x EXIT TRAY P/C | $39.60 |
1 x Roll Laminating Workstation | $279.00 |
1 x TIMING PULLEY-6DTBM184 | $208.07 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x Pouch Laminating Workstation | $219.00 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x FORM BELT BRACKET | $21.97 |
1 x Coil Crimper Pliers | $29.99 |