|
These punch dies fit the Onyx 4000Plus Heavy Duty Interchangeable Die Punch and the Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch. They provide more than 20 popular punch patterns on a single machine. All of these dies have a swing-away pin retainer that allows you to remove any pin to suit any length of paper.
Don't see what you want in this list? We can make almost any punch pattern in any combination of pin size and shape. Contact us today with your specifications.
Maximum Punch Capacity: | Depends on Punch Die Used 20# sheets |
Maximum Paper Size: | Any inches |
Construction: | Metal |
Binds Books Up To: | None inches |
38"x250' 3 mil Digikote Gloss $135.60 |
Count Perfing Blade $56.59 |
Renz SRW 360 Modular Drive Motor $1,781.00 |
Superior Quality 0.080 Utility $54.00 |
Vertical Graphik Blade Holder $90.00 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Pilot Light | $17.96 |
1 x Foldup 4" Wall Mount Literature Holder | $84.00 |
1 x ASSEMBLY, REMVBLE IDLER W/STAN | $1,496.14 |
1 x Clutch Unit | $92.91 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x Heavy Duty Hand Slot Punch | $59.95 |
1 x CR828 Semi-Automatic Creaser | $1,195.00 |
1 x Badge Reels | $2.95 |
1 x Passport Die Cutter | $105.00 |
1 x Coil Crimper Pliers | $29.99 |
1 x Zippy Cutter | $9.95 |
1 x Speedy-Lam 330R-10 10 Roller Pouch Laminator | $1,295.00 |
2 x Pressure Sensitive Clip | $39.90 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x 18" (45cm) Safety Straight Edge | $84.30 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x 62359 Stand, Waste Catcher & Roll Feeder Package for 120” Sabre Series 2 | $1,698.00 |
1 x SLIDE F.BOLT 2551110 | $23.68 |
1 x ML-9 9" Pouch Laminator | $299.00 |
1 x Business Card Pockets | $4.49 |
1 x HOUSING, SIPLICITY BEARING #PB | $275.31 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x Powerhouse PF17A Auto Paper Folder | $2,249.95 |
1 x RUBBER KEY S/W U-65 637400077 | $49.51 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x TCC-1200 Wide Format 45" Roll Laminator | $8,499.00 |
1 x NONSTK-INDICATOR LIGHT,RED,24V | $48.74 |
1 x PAPER SEPRTR >USE T12H26070 | $56.17 |
1 x CAP BEARING MOLDED | $35.22 |
1 x Photo Microsensor (KI1234-AALF)/DC615 | $51.22 |
1 x #214 SILICONE O-RING | $8.16 |
1 x NONSTK-ASSEMBLY,CHAIN TENSIONER | $987.26 |
1 x Plastic Luggage Strap | $19.95 |
1 x 62351 Stand, Waste Catcher & Roll Feeder Package for 40” Sabre Series 2 | $1,125.00 |
1 x Take One Coupon Clip | $376.00 |
1 x CRADLE BUSHING | $283.70 |
1 x CAPSTAN ROLLER GRIND | $120.22 |
1 x 62361 36" Stand for 40” Sabre Series 2 | $553.50 |
1 x MBM BC12 12up Business Card Cutter | $5,399.00 |
1 x 4" Screw Lock Rings | $29.47 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x DOUBLE DRIVE GEAR 2601062 DISCONTINUED | $110.71 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x MICHRO ADJUST ROD | $515.14 |
1 x 7" Easel Backs | $31.95 |
1 x 5" x 12" Paper Cutter Jogging Block | $84.00 |
1 x Pulley Unit | $25.95 |
1 x Binding Workstation | $219.00 |
1 x CR818 Manual Creaser | $620.00 |
1 x MENU SIZE (3 MIL) RF | $197.23 |
1 x Refill No.500 Staples (DC-S4, DFC-S, DBM-80H, AR-F15) | $129.60 |
1 x Finned Price Rail Flag Holder | $85.95 |
1 x HS-3000-GC Gutter Cut Business Card Slitter DISCONTINUED | $3,995.00 |
1 x Count Complete Perfing Assembly | $299.85 |
1 x Nylon Secure Tack | $13.50 |
1 x C900 ultra heavy duty coin counter and sorter | $1,389.95 |
1 x ECP13 Electric Perforator & Creaser | $1,799.00 |
1 x ROLLER BEARING, HEAT | $63.26 |
1 x Leather Luggage Strap | $45.50 |
1 x HOSE,TFLN 18LG 091.00118.01 | $72.30 |
1 x Finned Saddle Clip | $37.95 |
1 x Removable Strap Clip | $15.95 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x Table Top Slot Punch with Guide | $27.95 |
1 x ID Photo Die Cutter | $289.00 |
1 x UltraPhoto 13 Photo Pouch Laminator | $699.00 |
1 x 6mm Euro Standard Hollow Drill Bit | $44.98 |
1 x GEAR 20T | $20.31 |