|
The PH1850M 18.5" Heavy Duty Manual Stack Cutter cuts stacks of paper over 18" wide by over 3" thick in a single operation. The crank wheel clamp holds a full stack of paper securely, and the long lever produces the force necessary to cut that stack.
This cutter features heavy metal construction for many years of reliable service. It comes with a sturdy metal floor stand to support the cutter properly in operation.
Cut Length: | 18.5" inches |
Capacity: | 3.14" |
Warranty: | 1 Year |
Size: | 35.8" x 33" x 27" |
Shipping Weight: | 211 Pounds |
![]() 27" x 500' 1.5 Mil Gloss $53.12 |
![]() 0.065 inch "H" Sign Channel $34.95 |
![]() 25" x 250' 3 Mil Gloss Laminating $48.96 |
![]() XR Long Blades $27.00 |
![]() 9" x 100' 10 Mil Gloss Laminating $28.96 |
1 x PUNCH PIN .156 3-1 AP1 | $89.84 |
1 x FUSE STICKER 27C | $22.55 |
1 x DISCHARGE O-RING | $56.63 |
1 x Velobind System 2 | $2,995.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Rubber Ring Unit | $67.91 |
1 x TENSION BOLT 632501328 | $55.62 |
1 x 90900273002 ENCODER | $2,056.93 |
2 x UltraPhoto 13 Photo Pouch Laminator | $1,398.00 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x WIRE ASSY 638000156 | $22.31 |
1 x VBF 135A Top Left Cutting Knife | $354.00 |
1 x 1" Aluminum Screw Posts | $21.11 |
1 x Bulk Adhesive for Horizon Perfect Binders | $375.00 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x CORD SET-115V | $35.17 |
1 x 3" x 10" Paper Cutter Jogging Block | $62.40 |
1 x GBC Electric Velobind V110e | $249.00 |
1 x 36" Extended Measuring Arm, fits all models | $175.50 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x STRAP - JOG | $206.52 |
1 x Seypa S 87 Cutting Knife | $648.00 |
1 x PP03 BLANK PUNCH | $17.64 |
1 x 4" x 12" Paper Cutter Jogging Block | $75.00 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x Replacement Cutting Head for ARC & TE | $205.20 |
1 x Powerhouse PF17A Auto Paper Folder | $2,249.95 |
1 x 62366 36" Stand for 80” Sabre Series 2 | $693.00 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x 2-1/2" Loose Leaf Rings | $45.73 |
1 x Bearing, DBM-500/=013-10032 | $67.87 |
1 x O-RING-LRG-ROLLER >USE 0750109600 | $26.26 |
1 x ML-13 13" Pouch Laminator | $329.00 |
1 x GUIDE PAPER EDGE BIN >USE 7704972 | $22.99 |
1 x ROLLER, NIP IDLER | $59.84 |
1 x CB 3.8 602 W/O MTR | $1,441.84 |
1 x TRANSFORMER 600205 | $1,257.34 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x NIP,8500 | $8,261.20 |
1 x HEX HEAD SHAFT F/4104A N/S | $72.44 |
1 x WASHER M6 9930300 | $24.36 |
1 x ML-6 6" Pouch Laminator | $269.00 |
1 x Sight Line Strips for 63" Excalibur Series Cutters | $58.50 |
1 x Stopper Stay | $48.72 |