|
Extra Bond (EXB) low melt laminating film was specifically designed for laminating the output of digital copiers. It will adhere to large areas of toner and other materials where standard high melt films will fail.
EXB is specially formulated to meet the challenge of emulsion aggregation (EA) toner copiers. It melts at a lower temperature, so there is less chance of heat damage to sensitive originals.
The Details:
![]() Pro Cut 265 Cutting Knife $239.00 |
![]() Yellow "T" Silicone Cords $39.15 |
![]() Binding Workstation $219.00 |
![]() DuraCoil CI- Compact Coil Inserter $549.00 |
![]() 32 mm 4:1 Plastic Spiral Coil $57.89 |
1 x Marlon 200 Spiral Plastic Coil Binding Machine | $779.00 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x Stahl 135A Top Left Cutting Knife | $354.00 |
1 x Finish @ Coil M Coil Inserter | $419.00 |
1 x DuraCoil CI- Compact Coil Inserter | $549.00 |
1 x 2 Year Worry Free Guarantee (b) | $59.99 |
1 x iCoil 41 Manual Coil Punch and Electric Inserter | $308.00 |
1 x Count Complete Perfing Assembly | $299.85 |
1 x CoilPro 101 Spiral Coil Binding Machine | $129.00 |
1 x 2 Year Worry Free Guarantee (c) | $79.99 |
1 x Pawl | $28.63 |
1 x Photo Interrupter/DFC-120 | $30.62 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x Standard 45mm Textile Blades | $25.00 |
1 x Letter 5 Mil Laminating Pouch Boards | $25.95 |
1 x Replacement 28mm Fabric Cutting Wheels | $117.00 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x 104" Javelin Series 2 Cutter Bar | $1,066.50 |
1 x 1/4X3/8X.17ID SPACER | $3.43 |
1 x Spectra-Coat 40" UV Coater | $0.00 |
1 x 90007255006 HAND KNOB | $20.44 |
1 x OP PWB Unit/DF-915 | $540.85 |
1 x 14MM SPINE FRMR-CC914000 | $115.56 |
1 x Ceiling Grid Twist Hangers | $40.95 |
1 x SCR.,MACH.,CH.,HD.,M3x8 | $22.55 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x 5/16" SB-35 Bostitch type staples | $6.99 |
1 x Link | $5.06 |
1 x Two Piece Ceiling Grid Hangers | $79.00 |
1 x Prism 115 Cutting Knife | $642.00 |
1 x Angle Unit | $93.02 |
1 x Feeder MD410/=4000419C | $2,231.48 |
1 x Thermistor PSB-S3/UP-240 | $561.55 |
1 x VersaBind-E Electric Punch and Binding Machine | $2,172.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x SPACER, BEARING | $22.10 |
1 x Sight Line Strips for 63" Excalibur Series Cutters | $58.50 |
1 x Sensor Angle/V-570 | $15.32 |
1 x Stitch 'N Fold SF2 Booklet Maker | $14,999.00 |
1 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $666.00 |
1 x GUIDE-BOTTOM | $304.81 |
1 x 29000255015 ADJ DISC | $87.65 |