|
Extra Bond (EXB) low melt laminating film was specifically designed for laminating the output of digital copiers. It will adhere to large areas of toner and other materials where standard high melt films will fail.
EXB is specially formulated to meet the challenge of emulsion aggregation (EA) toner copiers. It melts at a lower temperature, so there is less chance of heat damage to sensitive originals.
The Details:
![]() Graphik D .017 Blades $82.80 |
![]() FC114-A Frankencreaser Digital $17,740.00 |
![]() 1/4" Colored Aluminum Screw Posts $28.24 |
![]() WirePro Advantage Plus Manual $595.00 |
![]() Ceiling Grid Twist Hanger with $40.95 |
1 x O-RING DRIVE BELT-CC2700 | $28.64 |
1 x GUIDE SIDE JTFY >USE 1771030 | $161.88 |
1 x BUFFER &CLUTCH GEAR 5200510 | $241.42 |
1 x WORM GEAR 2824110 | $65.87 |
1 x Pivano FG 118 Cutting Knife | $1,794.00 |
1 x BLOCK WEAR PAD | $9.77 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x ONYX HD8000 Manual Wire Closer | $609.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x 1/2" Solid Brass Screw Posts (10 Sets) | $28.01 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x TW-2100 Manual Wire Punch and Bind Machine | $459.00 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
2 x Yellow "T" Silicone Cords | $78.30 |
1 x iNumber Electric Hand Feed Numbering Machine | $3,950.00 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x Onyx PAL-14 Picks-A-Lift Automated Module | $2,799.00 |
1 x Ceiling Grid Twist Hanger with String | $40.95 |
1 x 5/8" type HO-5/8 staples | $10.43 |
1 x TRANSFORMER 600205 | $1,257.34 |
1 x 1/8" Solid Brass Screw Posts (10 Sets) | $27.16 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x Clear - No Stripe Copier Transparencies | $24.95 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |