|
These hollow drill bits fit Lawson, Miller HFD, and Baum RB long paper drills. They will drill up to a 3" stack of paper. Note that these long bits will not fit in the standard 2-1/4" drills.
For the standard Lawson, Miller HFD, and Baum RB drills, see our 1/2" Lawson / Miller HFD / Baum RB Drill Bits.
Diameter: | 1/2" |
Shaft Length: | 3" |
Drill Bit Capacity: | 3" |
![]() Lassco CR-50P Heavy Duty Floor $2,425.00 |
![]() 120" Keencut Table-Edge Rotary $991.00 |
![]() 25" x 500' 1.5 Mil Matte $84.98 |
![]() 18" Knife Guard $36.00 |
![]() 9" x 11" Composition Covers $39.95 |
1 x NONSTK-PIN GROOVE.125D X.75 | $20.05 |
1 x OP PWB Unit/DF-915 | $540.85 |
1 x Pick N' Hook Corrugated Plastic Hanger - 100 Pieces | $32.39 |
1 x SM-330 13" Pouch Laminator | $239.00 |
1 x NONSTK-GUARD, HINGE, CALENDER ROLL | $292.56 |
1 x HEATER WIRE FOR DS2700 | $24.36 |
1 x POWER SWITCH 637400042 | $49.93 |
1 x Roller A Unit/S2-ADF | $78.58 |
1 x P/C READY LIGHTBRKT | $57.89 |
1 x MACH TABPRESS.ROLLER | $51.40 |
1 x B/O EXIT SHAFT | $60.08 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x Menu 5 Mil Laminating Pouch Boards | $48.95 |
1 x Rear Cover Assy/DP-Le Series | $207.82 |
1 x WIRE ASSY 638000156 | $22.31 |
1 x SPRING EXT 7/16X.037X1-1/4 | $23.68 |
1 x 1217 FEED WHEEL Use W-A1217 | $69.12 |
1 x 12" Knife Guard | $24.00 |
1 x 16.5" Knife Guard | $33.00 |
1 x Stahl 135A Top Left Cutting Knife | $354.00 |
1 x 50P61 CAM BLOCK | $39.48 |
1 x 6.5mm Euro Standard Hollow Drill Bit | $24.98 |
1 x EGLE SIDE COVER (L) 633200006 DISCONTINUED | $181.70 |