|
These hollow drill bits fit Lassco Spinnit 1" paper drills. They will drill up to a 1" stack of paper.
For the standard Lassco Spinnit 2" drills, see our 5/16" Challenge/Lassco Drill Bits.
Diameter: | 5/16" |
Shaft Length: | 1" |
Drill Bit Capacity: | 1" |
![]() Ideal Triumph 4810 Cutting Knife $251.00 |
![]() 3" x 10" Paper Cutter Jogging $62.40 |
![]() Velcro® Tape $61.00 |
![]() 5/16 inch 2:1 Wire Binding $21.79 |
![]() 6.5mm Euro Standard Hollow Drill $24.98 |
1 x Lower Blade Unit/DC-645 | $326.03 |
1 x Harris 532 Bottom Front Cutting Knife | $438.00 |
1 x NOTCH PLATE ,24 CABI | $82.74 |
1 x CATENA TENSION KNOB 633000035 | $42.65 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x BLOWER NO. 50029026 115V/60HZ | $5,280.22 |
1 x Micro Switch (VX-52-1A3)/DC615,645 | $29.96 |
1 x B/O UPPER EXIT SHAFT | $69.90 |
1 x TCC-1200 Wide Format 45" Roll Laminator | $8,499.00 |
1 x Campeador JR Cutter Knife | $480.00 |
1 x O-RING DRIVE BELT-CC2700 | $28.64 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 29 TOOTH GEAR Z053100660 | $27.70 |
1 x FORM BELT BRACKET | $21.97 |
1 x CAP 20 UF 400 V 047680017 | $68.26 |
1 x MAIN CHARGE WIRE SUP9810-104 | $106.02 |
1 x Seypa S 87 Cutting Knife | $648.00 |
1 x Micro Switch/DC-645 | $41.63 |
1 x Martin Yale WC36 36" Paper Cutting Machine | $789.00 |
1 x T/S & FORM BASE | $377.00 |
1 x Proteus Workbench For 104" Javelin Integra | $805.50 |
1 x DOUBLE DRIVE GEAR (5200507) | $90.25 |
1 x SPRING NUT | $7.80 |