|
The accuracy of the Javelin Series 2 makes it ideal for cutting banner materials, pop-ups and other display materials that require precise and accurate cutting to within .008" over the full length of the cut. With this precise cutter, you can eliminate gaps and wasted material.
The Javelin Series 2 features a new, high performance cutting head design that relies on strong Graphik blades with a cutting depth up to 13mm. These unique reversible blades cater to both left and right-handed operators and cut materials up to ½". This new head can also accommodate an easy-to-change 45mm textile blade holder, as well as a vertical medium duty blade holder with a cutting depth up to 3⁄8" (10mm).
Lift & Hold Mechanism:Designed to fit the Javelin Series 2 and Max precision cutting bars, the Lift & Hold Mechanism is affixed to the table by screws, ultimately securing the cutter bar in place to prevent shifting while cutting. The device allows operators to easily lift the cutter bar, slide the material in place and clamp down to make precision cuts.
Big Bench Xtra:Another option is to combine the Javelin Series 2 with the Keencut Big Bench Xtra to create a complete cutting table and workstation for your shop.
Cut Length: | 84" |
Capacity: | 1/2" |
Size: | 89 1/2" x 6" D x 2 1/2" H |
Perfecta SDY-EZ Cutting Knife $378.00 |
CR 20 Corner Rounder $295.00 |
1/4" Push-to-Lock Loop Screws $19.25 |
3/16" Push-to-Lock Loop Screws $19.25 |
3/4" Colored Aluminum Screw Posts $36.41 |
1 x CANTILEVER GUARD / FILM BRK MN | $560.80 |
1 x 104" Javelin Integra (60288) | $1,287.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x RADIUS LARGE DIVIDER | $140.69 |
1 x Removable Strap Clip | $15.95 |
1 x CoilPro 101 Spiral Coil Binding Machine | $129.00 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x Badge Reels | $2.95 |
1 x Camco 250 Top Side (12") Cutter Knife | $156.00 |
1 x BCS210 Business Card Slitter | $1,685.00 |
1 x CoilPro 1000 Coil Binding Machine | $199.00 |
1 x Multicut 10/710 Cutting Knife | $430.00 |
1 x Roll Laminating Workstation | $279.00 |
1 x Passport Die Cutter | $105.00 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x POLY FLEX BELT, IB.#22824 | $73.74 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x Fujipla Drylam ALM 3220 Fully Automatic Laminator | $17,994.00 |
1 x 100" Keencut Table-Edge Rotary Trimmer (TE) | $885.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x Spring T/DB-10TR | $10.13 |
1 x Polar 115 CE Cutting Knife | $642.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x DRIVE ROLLER ORANGE 5003018 | $401.94 |
1 x WASHER M6 9930300 | $24.36 |
1 x LOWER LIMIT SW BRACKET 60038 | $123.62 |
1 x WIRING HARNESS | $86.89 |
1 x BUSHING, MODIFIED | $148.63 |
1 x WASHER 9001-570 | $22.10 |
1 x IDLER, SIDE GUIDE BELT | $1,014.01 |
1 x Ceiling Grid Twist Hangers | $40.95 |
1 x NONSTK-SWITCH RAMP-RH QO3100 | $22.32 |
1 x NONSTK-LED PCB ASSY | $21.83 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x ELBOW MALE 1/4 TO 1/8 NPT | $48.65 |