|
The accuracy of the Javelin Series 2 makes it ideal for cutting banner materials, pop-ups and other display materials that require precise and accurate cutting to within .008" over the full length of the cut. With this precise cutter, you can eliminate gaps and wasted material.
The Javelin Series 2 features a new, high performance cutting head design that relies on strong Graphik blades with a cutting depth up to 13mm. These unique reversible blades cater to both left and right-handed operators and cut materials up to ½". This new head can also accommodate an easy-to-change 45mm textile blade holder, as well as a vertical medium duty blade holder with a cutting depth up to 3⁄8" (10mm).
Lift & Hold Mechanism:Designed to fit the Javelin Series 2 and Max precision cutting bars, the Lift & Hold Mechanism is affixed to the table by screws, ultimately securing the cutter bar in place to prevent shifting while cutting. The device allows operators to easily lift the cutter bar, slide the material in place and clamp down to make precision cuts.
Big Bench Xtra:Another option is to combine the Javelin Series 2 with the Keencut Big Bench Xtra to create a complete cutting table and workstation for your shop.
Cut Length: | 104" |
Capacity: | 1/2" |
Size: | 109 1/4" W x 6" D x 2 1/2" H |
![]() 8mm Euro Standard Hollow Drill Bit $34.98 |
![]() 7/32" Pioneer Standard Drill Bit $31.79 |
![]() 25 mm 4:1 36" Plastic Spiral Coil $139.56 |
![]() 8 mm 4:1 36" Plastic Spiral Coil $36.64 |
![]() 25" x 500' 1.7 Mil Low Melt $134.34 |
1 x 14" I-Bar Shrink Wrap Sealer | $355.00 |
1 x 3-sided Mobile Mount | $62.95 |
1 x Kolbus HD 150 (9 Hole) Cutting Knife | $294.00 |
1 x Flat Belt/AF-100 | $45.41 |
1 x 3/8" Push-to-Lock Loop Screws | $19.60 |
1 x 18" x 25" 5 Mil Laminating Pouch Boards | $221.95 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x 4" Countertop Literature Holder | $49.50 |
1 x PERF HOLE, BASE | $212.13 |
1 x Car adaptor for Cassida products | $78.95 |
1 x Pigtail Ceiling Hangers | $47.95 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x POLY FLEX BELT, IB.#22824 | $73.74 |
1 x Cassida CleanPRO complete care kit for currency counters | $36.95 |
1 x 1" Loose Leaf Rings | $21.70 |
1 x PCB ASSFTY A/CUTTER INTERRUPTE | $28.76 |
1 x FOOT PEDAL C800/C400 | $36.34 |
1 x Cassida CleanPro air duster | $49.95 |
1 x Martin Yale 376B Cutting Knife | $119.00 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |
1 x Versalam-1300 13" Roll Laminator | $2,599.00 |
1 x 1" Solid Brass Screw Posts (10 Sets) | $35.89 |
1 x SEPARATOR PNEUMATIC ENCLOSURE | $7,511.17 |
1 x WORM GEAR | $78.62 |