|
These hollow drill bits fit Lawson, Miller HFD, and Baum RB standard paper drills.
Please note that, although they are designed for a 2-1/4" drill, these 1/8" hollow drill bits will drill a maximum of a 1-3/4" stack.
Diameter: | 3/16" |
Shaft Length: | 2-1/4" |
Drill Bit Capacity: | 1-3/4" |
12" x 500' 1.5 Mil Gloss $23.60 |
62361 36" Stand for 40” Sabre $553.50 |
25" x 37" 5 Mil Matte Laminating $295.95 |
36" Extended Measuring Arm for the $162.00 |
CombMac-24E Electric Comb Binding $1,395.00 |
1 x REGULATOR W1000-8N | $203.24 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x Side Glue Pellets for DB-290 Perfect Binder | $139.00 |
1 x Led PWB Unit | $33.83 |
1 x HOOK-COIL HOLE FTBFT | $73.51 |
1 x ROLL-MN DRV FOLD 53007-002 | $2,631.05 |
1 x NIP,8500 | $8,261.20 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x HOOK-COIL HOLE FTDFT | $73.39 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x Tungsten Carbide Glass Cutting Wheel for 63" Excalibur Series | $18.00 |
1 x TABLE END PANEL | $217.90 |
1 x Itoh 100 Cutting Knife | $1,062.00 |
1 x FITTING 90DEG 1/4NPTM 5/32TUBE | $38.89 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x BRASS CONNECTOR, HTR.WIRE | $48.66 |
1 x Minipad 4000 Padding Press | $199.00 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x DISCONTINUED Evolution E2 144" Cutter | $2,200.50 |
1 x Rosback 250 Bottom Front Cutting Knife | $170.00 |
1 x STEPPER DRIVE BD 4VSFR001 | $4,488.18 |
1 x TENSIONER SHAFT, S01 | $86.48 |
1 x D/FEEDER TENSION BUSH(PL) | $34.64 |