|
These hollow drill bits fit Lawson, Miller HFD, and Baum RB standard paper drills.
Please note that, although they are designed for a 2-1/4" drill, these 1/8" hollow drill bits will drill a maximum of a 1" stack.
Diameter: | 1/8" |
Shaft Length: | 2-1/4" |
Drill Bit Capacity: | 1" |
![]() 60952 Evolution 2 Bench for the $994.50 |
![]() Multicut 10/710 Cutting Knife $430.00 |
![]() Martin Yale 2600E Cutting Knife $319.00 |
![]() Graphik D .017 Blades $82.80 |
![]() 60950 Evolution 2 Bench for the $666.00 |
1 x CoilPro 2000 ECP+ Coil Binding Machine | $1,481.00 |
1 x PAPER GUIDE LOOP PIVOT ASY | $613.80 |
1 x STEPPER DRIVE BD 4VSFR001 | $4,488.18 |
1 x Marlon EZ Flex 100 Coil Inserter | $999.00 |
1 x iCoil 41 Manual Coil Punch and Electric Inserter | $308.00 |
1 x Finish @ Coil M Coil Inserter | $419.00 |
1 x BRUSH | $76.02 |
1 x DC Motor Controller, 4USCK212 | $2,929.12 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x EGLE SIDE COVER (L) 633200006 DISCONTINUED | $181.70 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x Triumph 3600 Cutting Knife | $78.00 |
1 x Gel Mounts | $119.00 |
1 x 10T MTR PULLEY,5100 USE NEW# WRO501012 | $101.62 |
1 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $666.00 |
1 x BRSHLSS DC GEARMOT >USE 1722899 | $7,641.97 |
1 x ADJUSTMENT BLOCK | $80.15 |
1 x Seybold 35 1/2" Dynaclamp Cutting Knife | $551.00 |
1 x Office Duty Manual Corner Rounding Machine | $169.00 |
1 x MB Belt DF-520 | $65.45 |
1 x THERMAL CUTOUT W/TERM (JD139) | $83.47 |
1 x BINDER ASSY DISCONTINUED | $117.51 |