|
These hollow drill bits fit Lawson, Miller HFD, and Baum RB long paper drills. They will drill up to a 3" stack of paper. Note that these long bits will not fit in the standard 2-1/4" drills.
For the standard Lawson, Miller HFD, and Baum RB drills, see our 3/8" Lawson / Miller HFD / Baum RB Drill Bits.
Diameter: | 3/8" |
Shaft Length: | 3" |
Drill Bit Capacity: | 3" |
![]() 3/8 inch Wire Binding Combs $33.86 |
![]() 5/8 inch Wire Binding Combs $52.19 |
![]() HS-2000 M Business Card Slitter $1,195.00 |
![]() PL-1200HP 12 in. High Performance $2,895.00 |
![]() 5/16 inch Wire Binding Combs $34.60 |
1 x 16" Knife Guard | $32.00 |
1 x Royo S72SAP Cutting Knife | $420.00 |
1 x 13.5" Knife Guard | $27.00 |
1 x Aluminum Snap Rail End Cap | $66.00 |
1 x RUBBER BRG | $16.87 |
1 x NEEDLE RLLR BEARING >USE 701020209 | $77.81 |
1 x Universal Banner Clip | $66.00 |
1 x DRIVE ROLLER ASSY. | $102.88 |
1 x BCS 1000M Business Card Cutter | $119.00 |
1 x BCS210 Business Card Slitter | $1,685.00 |
1 x 24" Knife Guard | $48.00 |
1 x 17.5" Knife Guard | $35.00 |
1 x Economy Banner Clip | $11.50 |
1 x Renz SRW 360 Modular Drive Motor | $1,781.00 |
1 x Ideal/MBM 208J Automatic Folder | $3,799.00 |
1 x Sponge Roller B | $83.71 |
1 x White Silicone Cord for the Sabre Series Cutters | $40.50 |
1 x BCS410 Business Card Slitter | $2,310.00 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x CABLE, RIBBON, 100CM, 20 PIN | $102.92 |
1 x Yellow "T" Silicone Cords | $39.15 |
1 x Silicone Spray Lubrication | $14.95 |
1 x Royo S72JR Cutting Knife | $480.00 |