|
These hollow drill bits are compatible with Euro standard paper drills. They have a 16mm shank and fit drills with 2" (51mm) stack capacity.
They fit European paper drills by Babs, Citiborma, Concorde, Durselen, Foellmer, Hang, Kobold, Nagel, Nfpe, Marchetti, Mercury, OMM, Pescha, Stago, Uchida, Venus, and more.
Diameter: | 9.5mm |
Shaft Length: | 2" |
Drill Bit Capacity: | 2" |
![]() Gel Mounts $119.00 |
![]() Ink Cartridges 10 Pack $94.95 |
![]() 1/4" Martin Yale / Lihit / $33.95 |
![]() 5/8" Colored Aluminum Screw Posts $35.81 |
![]() 4.5mm Euro Standard Hollow Drill $24.98 |
1 x Number-Rite Heavy Duty Sequential DISCONTINUED | $899.00 |
1 x Motor | $686.77 |
1 x THRUST NIDDLE ROLL BEARING ASSY | $29.38 |
1 x Pivano FG 103 Cutting Knife | $810.00 |
1 x 5080 Electric Stapler | $599.00 |
1 x Driving Roller/DP-460H | $160.60 |
1 x PERF LARGE DIVIDER | $126.76 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x Caps | $64.46 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x BLANK TENSION BLOCK | $22.73 |
1 x Letter 5 Mil Laminating Pouch Boards | $25.95 |
1 x Wire Cutter/Deluxe 26D | $34.92 |
1 x RM-12/4 (12") Cutting Mat (4 Pack) | $20.38 |
1 x PBPro 101 Plastic Comb Binding Machine | $99.00 |
1 x 11/16" type HO-11/16 staples | $13.58 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x K-28/2 Replacement Straight Blade (Pack of 2) | $13.20 |
1 x T/S BASE PAN, LARGE | $125.52 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x Metal Jack Chain | $123.95 |
1 x Model 160 Stock Truck DISCONTINUED | $490.00 |
1 x PLASTIC TEN CRL KNOB 633000030 | $65.12 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x VersaBind-E Electric Punch and Binding Machine | $2,172.00 |
1 x Assistant Roller | $59.59 |
1 x Textile Blade Holder | $85.50 |
1 x KM-31 Scoring and Perforating Blade Set | $13.20 |
1 x Cutter Knives | $0.00 |
1 x 8mm Euro Standard Hollow Drill Bit | $34.98 |
1 x FALCON THERMOSTATE BRACKE | $47.09 |
1 x Cube Digital Mixed Bill Counter | $799.00 |
1 x Multicut 10/720 Cutting Knife | $430.00 |
1 x FITTING 90DEG 1/4NPTM 5/32TUBE | $38.89 |