|
These hollow drill bits are compatible with Euro standard paper drills. They have an 11mm shank and fit drills with 2" (51mm) stack capacity.
They fit European paper drills by Babs, Citiborma, Concorde, Durselen, Foellmer, Hang, Kobold, Nagel, Nfpe, Marchetti, Mercury, OMM, Pescha, Stago, Uchida, Venus, and more.
Diameter: | 4mm |
Shaft Length: | 2" |
Drill Bit Capacity: | 2" |
![]() 1/8" Challenge Lassco Drill Bit $39.95 |
![]() 36" Extended Measuring Arm for the $162.00 |
![]() White Silicone Cord for the Sabre $40.50 |
![]() Stand, Waste Catcher & Roll Feeder $792.00 |
![]() Super Mini Pad Padding Press $99.00 |
1 x TRANSFORMER F/43 | $355.86 |
1 x Excalibur 3S Utility Cutter | $3,800.00 |
1 x Pad About Padding Press DISCONTINUED | $599.00 |
1 x Seybold 34" Dynaclamp Cutting Knife | $551.00 |
1 x Spring L/CC-228 | $40.26 |
1 x Count Stationary Roller Soft | $35.95 |
1 x Magnet Switch | $55.20 |
1 x NONSTK-EXT.SPRING,BRAKE TEN | $60.91 |
1 x Suction Cup with 1/4" Hole | $20.95 |
1 x White Silicone Cord for the Sabre Series Cutters | $40.50 |
1 x TRANSFORMER E-1623-5 | $69.08 |
1 x 62367 36" Stand for 100” Sabre Series 2 | $792.00 |
1 x Nipping Plate Spring DB-250 | $17.96 |
1 x PowerHouse PF17 Paper Folder | $999.00 |
1 x SCR MACH PHL TRS HD 6-32X3/8 | $23.93 |
1 x Photo Switch (LS1=LS3=LS4) | $40.26 |
1 x THERMOSTAT 40-6161DISCONTINUED | $200.78 |
1 x PUNCH PIN SET 3-5-7 MAGNA P70 | $135.27 |
1 x FILTER REGULATOR BRACKET B120 | $39.54 |
1 x EBA 10/720 Cutting Knife | $431.00 |
1 x 5" Easel Backs | $29.95 |
1 x Multicut 10/710 Cutting Knife | $430.00 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x CORE BUSHING BOLT 632500674 | $37.96 |
1 x Clear Plastic Tack with Foam Tape | $19.50 |
1 x DISCONTINUED DIE SET LOCK HANDLE | $103.98 |
1 x BLADE INSERT/SIDE SLITTER 5031 | $29.48 |
1 x SPACER, BEARING | $22.10 |
1 x 11/16" I.D. Black Plastic Snap Rings | $9.25 |
1 x K-30 Replacement Scoring Blade | $6.60 |
1 x 8" Screw Lock Rings | $50.16 |
1 x BEARING, MOD., 2BOLT FLANGE | $340.64 |