|
The Sabre 100" utility cutter is obsolete. it has been replaced by the 100" Sabre 2 utility cutter.
A handy portable sheet material cutter that can be used on a table top or mounted on its own stand. Cuts a wide variety of sheet material.
![]() HP-907A Perforator $0.00 |
![]() 1/4" Long Reach Hole Punch $89.95 |
![]() Multicut 5550 Cutting Knife $374.00 |
![]() 3/8" Lawson / Miller HFD / Baum RB $32.95 |
![]() Maxima MH 80 Cutting Knife $510.00 |
1 x NOTCH PLATE ,24 CABI | $82.74 |
1 x BELT, F/INFEED TRANSPORT DISCONTINUED | $234.55 |
1 x B/F LIFT SPRING | $32.76 |
1 x Sponge Roller/DP-63S/P | $86.39 |
1 x 1162 HANDLE BLADE | $112.30 |
1 x HOOK-COIL HOLE FTAFT | $73.39 |
1 x 1/4 HAIRPIN CLIP | $4.10 |
1 x 4mm Euro Standard Hollow Drill Bit | $24.98 |
1 x KM-31 Scoring and Perforating Blade Set | $13.20 |
1 x 2 Year Worry Free Guarantee (c) | $79.99 |
1 x Nylon Secure Tack | $13.50 |
1 x TRIM SEAL | $23.68 |
1 x 7/8" I.D. Black Plastic Snap Rings | $12.49 |
1 x BUSHING, MODIFIED | $148.63 |
1 x Metal Loop Hangers | $59.50 |
1 x Pull down rod 44013 | $245.28 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x PTOPIC FILM SHAFT BRAKE BLOCK | $83.59 |
1 x 62366 36" Stand for 80” Sabre Series 2 | $693.00 |
1 x Pear Clips | $12.29 |
1 x SCR SEMS UNIT 4-40X3/16 | $23.68 |
1 x Count Stationary Roller Std | $35.95 |
1 x 1/2" Push-to-Lock Loop Screws | $19.98 |
1 x BUMPER-STEM USE 0147003000 | $20.72 |
1 x NONSTK-SLITTER BLADE BACK PLATE | $553.44 |
1 x High Capacity Padding Press | $349.00 |
1 x REGULATOR W1000-8N | $203.24 |
1 x HR-PL330 13" Photo Pouch Laminator | $189.00 |
1 x Gear 20T | $21.33 |
1 x Graphik D .017 Blades | $82.80 |
1 x ASY MARK VII COUNTER ASSEMBLY | $192.40 |
1 x RM-18/2 18" Cutting Mat (2 Pack) | $11.29 |
1 x Notching Blade/DB-250 | $231.58 |
1 x BUSHING, MODIFIED, 1-5/8 X 1-1 | $140.85 |