|
The MightyLam 2700HC Roll Laminator has been Discontinued and replaced by the Ledco Premier 4 Roll Laminator 25" Roll Laminating Machine
See our Roll Laminating Machines index for a complete list of our current models.
MightyLam 2700HC Roll Laminator was redesigned to be a roll laminator in a quick print environment it can use up to 27" roll film and mounting board up to 24" wide. The MightyLam 2700HC Roll Laminator features hot and cold lamination with dual hated rollers, release liner take up and a 1/4" mounting capability. Affordable and functional, this laminator is capable of running all types of cold and heat-set pressure sensitive laminates, adhesives and encapsulating with true thermal laminates. In addition to being so versatile, this machine features a "heat assist" mode (top roller heat only) that delivers the perfect heat level to increase initial adhesion and clarity of slow curing pressure sensitive films, lessening the time to receive finished output suitable for display. The MightyLam 2700HC Laminating/Mounting Machine will afford you the experience of incomparable laminating quality and value with the plug-and-play machine. Best of all, the MightyLam 2700HC is made in the USA.
![]() Hand Held Corner Rounder Punch $69.95 |
![]() CoilPro 2000 EPI Coil Binding $1,799.00 |
![]() Duplo DBM-80H Bookletmaker $6,500.00 |
![]() LM 1910 10" Hot / Cold Pouch $0.00 |
Keencut 60532 $0.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x Ideal Triumph 3905 Cutting Knife | $228.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x ONYX HD8370 Insert-A-Bind Wire Inserter/Closer | $1,729.00 |
1 x WirePro 101 3:1 Wire Punch & Bind Machine | $189.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Pillar | $6.08 |
1 x BEARING, FLANGE FC-SCM-204 | $932.30 |
1 x 25" x 500' 1.7 Mil Low Melt Laminating Roll Film | $134.34 |
1 x DC Motor Assy/DP-U Series | $159.35 |
1 x 1162 BOARD BLADE | $66.80 |
1 x FLAT BELTS N4-K1021-01 | $54.28 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 29000255015 ADJ DISC | $87.65 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x SHIM, 3.0MM, WITH FLAT | $474.06 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x LATCH, SPRING | $68.08 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x NONSTK-#3 E.RING | $20.44 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x ACTUATOR 11A-21260 | $22.10 |
1 x CAP 20 UF 400 V 047680017 | $68.26 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x Martin Yale W24 24" Paper Cutting Machine | $334.99 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x Wohlenberg 42" Pacemaker II Cutting Knife | $582.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x MK7 230VAC JUMPER WIRE | $45.60 |
1 x DIE ASSY (7 PUNCH) | $374.55 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x Plastic Luggage Strap | $19.95 |