|
The Javelin 80" utility cutter is obsolete. it has been replaced by the 84" Javelin Series 2 Cutter Bar.
Highly accurate cutting of foam core, honeycomb and corrugated plastics, vinyl and plastic film, cardboard, flex plates, and many other materials. Use this cutter where high accuracy is essential, such as for cutting butt joints on sectional panels.
![]() HR13 13" Photo Laminator $0.00 |
![]() 36" Stand for the 54" 60608 $472.50 |
Ibico 530vb Velobind $0.00 |
Javelin 60" Utility Cutter $0.00 |
![]() Tabletop Manual Paper Cutting $0.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x Ideal Triumph 3905 Cutting Knife | $228.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x ONYX HD8370 Insert-A-Bind Wire Inserter/Closer | $1,729.00 |
1 x WirePro 101 3:1 Wire Punch & Bind Machine | $189.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Pillar | $6.08 |
1 x BEARING, FLANGE FC-SCM-204 | $932.30 |
1 x 25" x 500' 1.7 Mil Low Melt Laminating Roll Film | $134.34 |
1 x DC Motor Assy/DP-U Series | $159.35 |
1 x 1162 BOARD BLADE | $66.80 |
1 x FLAT BELTS N4-K1021-01 | $54.28 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 29000255015 ADJ DISC | $87.65 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x SHIM, 3.0MM, WITH FLAT | $474.06 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x LATCH, SPRING | $68.08 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x NONSTK-#3 E.RING | $20.44 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x ACTUATOR 11A-21260 | $22.10 |
1 x CAP 20 UF 400 V 047680017 | $68.26 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x Martin Yale W24 24" Paper Cutting Machine | $334.99 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x Wohlenberg 42" Pacemaker II Cutting Knife | $582.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x MK7 230VAC JUMPER WIRE | $45.60 |
1 x DIE ASSY (7 PUNCH) | $374.55 |
1 x Breakaway Neck Lanyards | $34.95 |