|
The Javelin 60" utility cutter is obsolete. it has been replaced by the 64" Javelin Series 2 Cutter Bar.
Highly accurate cutting of foam core, honeycomb and corrugated plastics, vinyl and plastic film, cardboard, flex plates, and many other materials. Use this cutter where high accuracy is essential, such as for cutting butt joints on sectional panels.
![]() 43"x250' 10 mil Digikote Gloss $562.47 |
![]() Macey 642 Top Side Cutting Knife $134.00 |
![]() 51"x250' 5 mil Digikote Gloss $396.39 |
![]() Onyx HD7500 Horizontal Wire, Comb $6,179.00 |
![]() Entry 4500 45 inch Roll Laminator $0.00 |
1 x Standard 45mm Textile Blades | $25.00 |
1 x Graphik D .017 Blades | $82.80 |
1 x NONSTK-SWITCH RAMP-RH QO3100 | $22.32 |
1 x E65 H/ROLLER>607040513(29 1/4L | $521.18 |
1 x ML-13 13" Pouch Laminator | $329.00 |
1 x DC GEAR MOTOR >USE 609020200 | $384.89 |
1 x ProClick® P210E Electric Binding Machine (01GBC7708180) | $499.00 |
1 x Scoring Blade for Acrylic | $25.00 |
1 x FORM BELT BRACKET | $21.97 |
1 x Seybold 34" Dynaclamp Cutting Knife | $551.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Horizon BQ-160 Perfect Binder | $20,085.00 |
1 x Replacement Punch Head/Disk Set for XHC-150 Punch, 3 9/32 Heads & 6 Disks/set | $53.59 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $697.50 |
1 x 6mm Euro Standard Hollow Drill Bit | $44.98 |
1 x EXIT TRAY P/C | $39.60 |
1 x 3" Screw Lock Rings | $28.95 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x AUTOFEED WHEEL AA1462 FF22 | $88.50 |
1 x NONSTK-LEFT END CAP | $48.76 |
1 x FEED BELT, 62001 | $41.85 |
1 x PB LOGO GEST QB373 | $22.10 |
1 x MTR.BRUSH,LEESON 959 | $66.16 |
1 x RUBBER KEY S/W 637400083 | $54.97 |
1 x 25"x250' 5 mil Digikote Gloss Laminating Film | $194.30 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x GUIDE PLATE#93E-50670 | $21.87 |
1 x Clamp Pads | $57.95 |
1 x DRIVE BELT | $16.70 |
1 x RUBBER WHEEL PDICI30000#30450 | $65.90 |
1 x THERMOSTAT 40-6161DISCONTINUED | $200.78 |
1 x Cutter Knives | $0.00 |
1 x Pouch Laminating Workstation | $219.00 |
1 x Table Top Slot Punch with Guide | $27.95 |
1 x iCoil 41 Manual Coil Punch and Electric Inserter | $308.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x Lamitek PhotoPro 13" Pouch Laminator | $259.00 |
1 x Roll Laminating Workstation | $279.00 |
1 x Pressure Sensitive Pin | $24.95 |
1 x CoilPro ECI Coil Binding Machine | $309.00 |