|
This booklet maker has been discontinued and replaced by the StitchFold Bookletmaker.
Other Bookletmakers can be seen on our bookletmakers index.
This is a unit used for Demonstration purposes in our office. It's been used to make 3500 Booklets.
Ideal for high quality, short-run color applications, Duplo's DBM-80H booklet-maker can be used in-line or off-line with Hewlett Packards' HP LaserJet 8000DN*, 8100DN*, Mopier 320, Color LaserJet 8500DN and 8550DN Series printers to create and integrated printing and bookletmaking system. In addition to offering the convenience of true hands off operation, the bookletmaker's unique vertical design makes it extremely compact.
When used in line with an HP LaserJet printer, the DBM-80H fully integrates with the printing system and the digital front end. This means paper size settings are automatic. Variable booklet sizes and flat sheets can run continuously without interruption, and fold only documents also can be accommodated.
In the off line mode, which can be accomplished at the simple touch of a button, the DBM-80H offers automatic setup and changeover. As an added convenience, a hand feed station allows users to easily merge color documents with black and white pages.
Booklets can be produced at speeds of up to 2,000 per hour, and precise face trims are provided by the optional DBM-80HT trimmer
*requires either a C4780S multiple input tray or C4781A high capacity input tray and a C2985B EIO disk drive.
ADSS offers a 90 day parts warranty on all refurbushed equipment. This warranty covers any defective parts and excludes wearable parts.
![]() LM 1910 10" Hot / Cold Pouch $0.00 |
Keencut 60532 $0.00 |
![]() Pouch Laminators - A400 4 inch $0.00 |
![]() AV18 Roll Laminator $0.00 |
Roll Laminators - Minikote $0.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x Ideal Triumph 3905 Cutting Knife | $228.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x ONYX HD8370 Insert-A-Bind Wire Inserter/Closer | $1,729.00 |
1 x WirePro 101 3:1 Wire Punch & Bind Machine | $189.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Pillar | $6.08 |
1 x BEARING, FLANGE FC-SCM-204 | $932.30 |
1 x 25" x 500' 1.7 Mil Low Melt Laminating Roll Film | $134.34 |
1 x DC Motor Assy/DP-U Series | $159.35 |
1 x 1162 BOARD BLADE | $66.80 |
1 x FLAT BELTS N4-K1021-01 | $54.28 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 29000255015 ADJ DISC | $87.65 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x SHIM, 3.0MM, WITH FLAT | $474.06 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x LATCH, SPRING | $68.08 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x NONSTK-#3 E.RING | $20.44 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x ACTUATOR 11A-21260 | $22.10 |
1 x CAP 20 UF 400 V 047680017 | $68.26 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x Martin Yale W24 24" Paper Cutting Machine | $334.99 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x Wohlenberg 42" Pacemaker II Cutting Knife | $582.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x MK7 230VAC JUMPER WIRE | $45.60 |
1 x DIE ASSY (7 PUNCH) | $374.55 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x Plastic Luggage Strap | $19.95 |