|
NEW! The new Martin Yale CR818 is simple and economical to use. Just unpack the machine, adjust the paper stops, and pull the lever to crease a sheet.
Paper Size: | 14" x 18.2" |
Maximum Paper Weight: | 341 GSM 130# Cover 16 (0.016”) Point |
Paper Feed: | Hand |
Numbering: | No |
Perforating: | No |
Scoring: | Yes |
Counter: | No |
Power: | Manual |
Size: | 5.25” x 24” x 20” |
Weight: | 26 Pounds |
Onyx HD7500 Horizontal Wire, Comb $6,179.00 |
Onyx PAL-14 Picks-A-Lift Automated $2,799.00 |
5/32" Lawson / Miller HFD / Baum $30.79 |
Perfmaster Dash Perforating and $3,720.00 |
3/8" Lawson / Miller HFD / Baum RB $29.79 |
1 x DRIVE ROLLER ASSY. | $102.88 |
1 x Thermal Head PCB | $620.70 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x WIRE ASSFTY EXCELAM II-355 | $23.44 |
1 x Pulley Unit | $65.04 |
1 x Black Loop Head Adhesive Buttons | $25.95 |
1 x Brush/DB-280 | $55.28 |
1 x Digital 60 Wide Format Laminator | $18,999.00 |
1 x TRANSFORMER-DISCONTINUED | $110.93 |
1 x NONSTK-DEFEATURED CHIP20201V70535 | $658.20 |
1 x Macey 532 Top Front Cutting Knife | $186.00 |
1 x DETECT FINGER, IS125040 | $177.04 |
1 x Separator Base Unit/DF-505,520,915,920 | $41.67 |
1 x PAPER GUIDE LOOP PIVOT ASY | $613.80 |
1 x BCS 1000M Business Card Cutter | $119.00 |
1 x HTSHOE CVR PLSTC W PRNT DISCONTINUED | $45.84 |
1 x VBF 135A Top Right Cutting Knife | $354.00 |
1 x SCR SEMS UNIT 4-40X3/16 | $23.68 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x CB 3.8 602 W/O MTR | $1,441.84 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x TBD - MICROPRCSSR Z-705 | $850.62 |
1 x TCC-1200 Wide Format 45" Roll Laminator | $8,499.00 |
1 x BCS412 Business Card Slitter | $1,979.00 |
1 x BEARING 93L-21050 | $61.39 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x SPROCKET, P30-5M-15AL,20MM BOR | $742.24 |
1 x VBF 145AF Top Front Cutting Knife | $354.00 |