|
The VersaBind-E electric punch with interchangeable "EZ Slide" dies punches and binds plastic coil, wire, and plastic comb bindings. It features an electric punch, a manual comb spreader, and a manual wire closer.
The VersaBind-E comes with four punch dies: 19 hole comb pattern, 2:1 for wire, 3:1 for wire, and 4:1 for coil. No extra machines to buy; everything is included to bind coil, wire, and comb out of the box.
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | All |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | 1.0 inches |
Warranty: | 1 year |
Power: | 120 V, 60 Hz. |
Shipping Weight: | 102.1 Pounds |
BAG FULL MICROSWITCH ASSEMBLY $0.00 |
Pressure Sensitive Pin $24.95 |
BookletMac Booklet Maker $2,069.00 |
Replacement Punch Head/Disk Set $53.59 |
Onyx 4000Plus Heavy Duty $1,848.85 |
1 x REGULATOR W1000-8N | $203.24 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x Side Glue Pellets for DB-290 Perfect Binder | $139.00 |
1 x Led PWB Unit | $33.83 |
1 x HOOK-COIL HOLE FTBFT | $73.51 |
1 x ROLL-MN DRV FOLD 53007-002 | $2,631.05 |
1 x NIP,8500 | $8,261.20 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x HOOK-COIL HOLE FTDFT | $73.39 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x Tungsten Carbide Glass Cutting Wheel for 63" Excalibur Series | $18.00 |
1 x TABLE END PANEL | $217.90 |
1 x Itoh 100 Cutting Knife | $1,062.00 |
1 x FITTING 90DEG 1/4NPTM 5/32TUBE | $38.89 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x BRASS CONNECTOR, HTR.WIRE | $48.66 |
1 x Minipad 4000 Padding Press | $199.00 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x DISCONTINUED Evolution E2 144" Cutter | $2,200.50 |
1 x Rosback 250 Bottom Front Cutting Knife | $170.00 |
1 x STEPPER DRIVE BD 4VSFR001 | $4,488.18 |
1 x TENSIONER SHAFT, S01 | $86.48 |
1 x D/FEEDER TENSION BUSH(PL) | $34.64 |
1 x Clutch Unit | $92.91 |
1 x 16" Bag Sealer with Cutter | $119.95 |
1 x Roller, Triple Envelope Hopper | $132.73 |
1 x Unit Power/Motor BD/=7A1-21670 | $1,061.33 |