|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
![]() RENZ TC-20 Thumb Cut Paper $189.00 |
![]() Onyx 3 in 1 PPS $10,370.00 |
![]() Martin Yale W30 30" Paper Cutting $559.00 |
![]() FlexiPunch-M Heavy-Duty Manual $479.00 |
![]() Onyx APES-14 Automatic Paper $3,799.00 |
1 x NX Snap Rail End Cap | $39.50 |
1 x SPACER, BEARING | $22.10 |
1 x FP1(B) Mega Duty Hole Punch | $219.00 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x Campeador S72SAP Cutter Knife | $420.00 |
1 x Wire Unit/AF-100 | $32.37 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x MBM Triumph 6660 Programmable Automatic Stack Cutter | $19,599.00 |
1 x Snap-apart Spiral Sign Holder | $139.50 |
1 x SHAFT, CORE, ORCA IV | $3,253.19 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x Photo Interrupter-Back Jogger Section | $31.05 |
1 x BLOCK WEAR PAD | $9.77 |
1 x Model 139 Stock Truck DISCONTINUED | $620.00 |
1 x 16" Knife Guard | $32.00 |
1 x Flat Belt/AF-100 | $45.41 |
1 x 13.5" Knife Guard | $27.00 |
1 x 12" Knife Guard | $24.00 |
1 x SWITCH BAR | $36.49 |
1 x Big Bench Xtra for 64" Javelin Xtra & Series 2 | $774.00 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x ASY SOLDER CTR. RECTIFIER | $60.58 |
1 x BUSINESS CARS (10 MI | $90.92 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x 14.5" Knife Guard | $29.00 |
1 x 24" Knife Guard | $48.00 |
1 x Model 126 Stock Truck DISCONTINUED | $500.00 |
1 x 19" Knife Guard | $38.00 |
1 x NONSTK-ELBOW MALE SWIVEL1/4 TO 1/8NPT | $60.78 |
2 x Triumph 3900 Cutting Knife | $456.00 |
1 x 22" Knife Guard | $44.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x 21" Knife Guard | $42.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x 22.5" Knife Guard | $45.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Zippy Cutter | $9.95 |
1 x Roll Laminator Cleaning Kit | $62.95 |