|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
![]() FlexiPunch-M Heavy-Duty Manual $479.00 |
![]() 9/32" Iram / Sterling Long Drill $36.95 |
![]() 3/8" Challenge/Lassco Drill Bit $29.69 |
![]() Sabre Series 2 GPC 60" Cutter $1,430.00 |
![]() 7/16" Lassco Spinnit® 1" Hollow $30.49 |
1 x EGLE SIDE COVER (L) 633200006 DISCONTINUED | $181.70 |
1 x Timing Belt (60S4.5M360) DISCONTINUED | $52.93 |
1 x TIE SPRING | $42.54 |
1 x NONSTK-SWITCH RAMP-RH QO3100 | $22.32 |
1 x PERF INTLCK SWT BRKT | $16.47 |
1 x Big Bench Xtra for 124" Javelin Xtra & Series 2 | $1,170.00 |
1 x Shaft | $23.90 |
1 x Sabre Series 2 GPC 60" Cutter (60736) | $1,430.00 |
1 x Sabre Series 2 GPC 100" Cutter (60738) | $1,810.00 |
1 x Rubber Magnet | $82.62 |
1 x TOP LT BAR SPRT | $15.58 |
1 x 10 Up Shipping Labels | $19.95 |
1 x ROLLER, NIP IDLER | $59.84 |
1 x 60952 Evolution 2 Bench for the 104" Evolution E2 | $994.50 |
1 x SCR.,MACH.,CH.,HD.,M3x8 | $22.55 |
1 x CR828 Semi-Automatic Creaser | $1,195.00 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |
1 x 24" Knife Guard | $48.00 |
1 x D-80 F/ROLLER 631800110 | $1,144.08 |
1 x Zippy Cutter | $9.95 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x DC-238N Perf & Score Cutter | $279.00 |
1 x 18" Knife Guard | $36.00 |
1 x CC-10 Handheld Rotary Trimmer | $29.50 |
1 x Aluminum Snap Rail End Cap | $66.00 |
1 x 1/4" Plastic Card Punch | $90.95 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x Cart for the PB2000T Perfect Binder | $599.00 |
1 x Durabinder Plastic Comb Binding Machines | $329.00 |
1 x 21" Knife Guard | $42.00 |
1 x Gel Mounts | $119.00 |
1 x 12" Knife Guard | $24.00 |
1 x 16" Knife Guard | $32.00 |
1 x SQUARE KEY | $23.68 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x 22" Knife Guard | $44.00 |
1 x 5/8" type HO-5/8 staples | $10.43 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 2230 IR counterfeit detector | $229.95 |