|
The HD7700 Ultima is the top of the line heavy duty durable Table Top Punch that has no equal. Combining the Rhin-O-Tuff patented Quick Change Die System with the following exciting new features:
EACH DIE IS SOLD SEPARATELY
With these new features plus a 3 year warranty along with all of the standard features below, the HD7700 Ultima will handle any size project, large or small. Designed for high volume commercial and corporate use.
Maximum Punch Capacity: | 55 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | All |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts AC / 4 AMPS / 60 Hz |
Size: | 9" H x 23" W x 23" D |
Shipping Weight: | 88 Pounds |
ProClick® P210E Electric Binding $499.00 |
YOKE $0.00 |
Triumph 3600 Cutting Knife $78.00 |
Onyx HD7500 Horizontal Wire, Comb $6,179.00 |
GBC C800 Pro / Ibico EPK21 Plastic $2,898.75 |
1 x REGULATOR W1000-8N | $203.24 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x Side Glue Pellets for DB-290 Perfect Binder | $139.00 |
1 x Led PWB Unit | $33.83 |
1 x HOOK-COIL HOLE FTBFT | $73.51 |
1 x ROLL-MN DRV FOLD 53007-002 | $2,631.05 |
1 x NIP,8500 | $8,261.20 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x HOOK-COIL HOLE FTDFT | $73.39 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x Tungsten Carbide Glass Cutting Wheel for 63" Excalibur Series | $18.00 |
1 x TABLE END PANEL | $217.90 |
1 x Itoh 100 Cutting Knife | $1,062.00 |
1 x FITTING 90DEG 1/4NPTM 5/32TUBE | $38.89 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x BRASS CONNECTOR, HTR.WIRE | $48.66 |
1 x Minipad 4000 Padding Press | $199.00 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x DISCONTINUED Evolution E2 144" Cutter | $2,200.50 |
1 x Rosback 250 Bottom Front Cutting Knife | $170.00 |
1 x STEPPER DRIVE BD 4VSFR001 | $4,488.18 |
1 x TENSIONER SHAFT, S01 | $86.48 |
1 x D/FEEDER TENSION BUSH(PL) | $34.64 |
1 x Clutch Unit | $92.91 |
1 x 16" Bag Sealer with Cutter | $119.95 |
1 x Roller, Triple Envelope Hopper | $132.73 |
1 x Unit Power/Motor BD/=7A1-21670 | $1,061.33 |
1 x CONV BELT 14.95 DISCONTINUED | $927.98 |