|
The ONYX HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine is a 24-inch (610mm) open-ended comb, wire, spiral and coil punch machine for calendar and other applications. It features the patented “quick change” die system for changing punch patterns in 30 seconds. There is built-in die storage to conveniently store two 24-inch (610 mm) dies behind the Onyx HD7500H. It has a pull-out extension table for larger size jobs, which reduces overall footprint when not in use.
The Onyx HD7500 Horizontal was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. The machine comes with twin motors, giving you plenty of power for those difficult jobs. Add a three-year warranty on the makes the HD7500 top of its class. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 24 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 8 Amps, 60HZ |
Size: | 18" H x 32" W x 20" D |
Shipping Weight: | 162 Pounds |
![]() PF-P3100 Paper Folder $3,460.00 |
![]() RAF-11 Fully Automatic $0.00 |
![]() ValueLam 4500 Laminating Mounting $0.00 |
![]() Stago Salut Flat and Saddle $0.00 |
Roll Laminators - Minikote $0.00 |
1 x M&E BUMPER #4068-705 | $4.48 |
1 x Rosback 250 Top Front Cutting Knife | $245.00 |
1 x Cassida M-18 replacement bulbs | $9.95 |
1 x 85 series remote display | $78.95 |
1 x Hang Tab | $65.95 |
1 x HEATR HOUSING ASY(UP)638200001 | $119.26 |
1 x C900 coin bagging attachment | $78.95 |
1 x NONSTK-GUARD, HINGE, CALENDER ROLL | $292.56 |
1 x SNAP SWITCH | $38.19 |
1 x MBM/Ideal AP30 Air Purifier | $249.00 |
1 x MARKVII CONVEYOR MOTOR RETRO | $390.81 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x Miracle LMM 72 Cutting Knife | $354.00 |
1 x Count Slit Blade | $46.50 |
1 x 10T MTR PULLEY,5100 USE NEW# WRO501012 | $101.62 |
1 x WASHER FENDER , M6 | $20.44 |
1 x KEY SHORT | $44.94 |
1 x Finned Saddle Clip | $37.95 |
1 x Roller DISCONTINUED USE 9S2-N1350 | $168.98 |
1 x TENSION ROLLER PIN(PL) | $20.44 |
1 x Finned Edge-Clip | $89.95 |
1 x MAGNA EDGE GUIDE KIT | $82.92 |
1 x Hoerauf 135A Top Left Cutting Knife | $354.00 |
1 x MBM/Ideal Trimuph 4810 Cutting Sticks | $75.98 |
1 x Sprint 5000 Booklet Maker | $9,399.00 |
1 x Hoerauf 135A Top Right Cutting Knife | $354.00 |
1 x 1" Solid Brass Screw Posts (10 Sets) | $35.89 |
1 x 1/8" Solid Brass Screw Posts (10 Sets) | $27.16 |
1 x SCR 10-32X3/4 HHS (SE | $23.68 |
1 x 5/16-18X1 3/4SL.OVAL | $8.96 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x DISCONTINUED THERMOSTAT | $77.14 |
1 x Ceiling Grid Clip Hangers | $12.95 |
1 x Seypa PA 92 Cutting Knife | $680.00 |
1 x DRIVE ROLLER ASSY. | $102.88 |
1 x TIMING BELT RUBBER 170XL037 | $48.95 |
1 x DISCONTINUED PLATE, UPPER STACKER | $344.76 |
1 x CB 3.8 602 W/O MTR | $1,441.84 |
1 x Flat Belt | $107.73 |
1 x GUIDE SIDE JTFY >USE 1771030 | $161.88 |
1 x WATER HEATER, 230V (DOMESTIC) | $10,837.19 |
1 x BEARING, FLANGE FC-SCM-204 | $932.30 |
1 x Paper Backed Copier Transparencies | $34.95 |
1 x RM-18/2 18" Cutting Mat (2 Pack) | $11.29 |
1 x HS 2000 MGC 8up Business Card Slitter DISCONTINUED | $1,395.00 |
1 x DISCONTINUED ROD,NIP GUIDE | $266.40 |
1 x MBM Triumph 4815 18-7/8 inch Semi Automatic Paper Cutter | $9,669.00 |