|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
![]() PBPro 200 Plastic Comb Binding $199.00 |
![]() Foam Spacer Blocks $462.00 |
![]() Perfmaster Air V3 Perforating and $11,099.00 |
![]() Aluminum Snap Rail $195.00 |
![]() Triumph 5221 Cutting Knife $259.00 |
1 x EGLE SIDE COVER (L) 633200006 DISCONTINUED | $181.70 |
1 x Timing Belt (60S4.5M360) DISCONTINUED | $52.93 |
1 x TIE SPRING | $42.54 |
1 x NONSTK-SWITCH RAMP-RH QO3100 | $22.32 |
1 x PERF INTLCK SWT BRKT | $16.47 |
1 x Big Bench Xtra for 124" Javelin Xtra & Series 2 | $1,170.00 |
1 x Shaft | $23.90 |
1 x Sabre Series 2 GPC 60" Cutter (60736) | $1,430.00 |
1 x Sabre Series 2 GPC 100" Cutter (60738) | $1,810.00 |
1 x Rubber Magnet | $82.62 |
1 x TOP LT BAR SPRT | $15.58 |
1 x 10 Up Shipping Labels | $19.95 |
1 x ROLLER, NIP IDLER | $59.84 |
1 x 60952 Evolution 2 Bench for the 104" Evolution E2 | $994.50 |
1 x SCR.,MACH.,CH.,HD.,M3x8 | $22.55 |
1 x CR828 Semi-Automatic Creaser | $1,195.00 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |
1 x 24" Knife Guard | $48.00 |
1 x D-80 F/ROLLER 631800110 | $1,144.08 |
1 x Zippy Cutter | $9.95 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x DC-238N Perf & Score Cutter | $279.00 |
1 x 18" Knife Guard | $36.00 |
1 x CC-10 Handheld Rotary Trimmer | $29.50 |
1 x Aluminum Snap Rail End Cap | $66.00 |
1 x 1/4" Plastic Card Punch | $90.95 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x Cart for the PB2000T Perfect Binder | $599.00 |
1 x Durabinder Plastic Comb Binding Machines | $329.00 |
1 x 21" Knife Guard | $42.00 |
1 x Gel Mounts | $119.00 |
1 x 12" Knife Guard | $24.00 |
1 x 16" Knife Guard | $32.00 |
1 x SQUARE KEY | $23.68 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x 22" Knife Guard | $44.00 |
1 x 5/8" type HO-5/8 staples | $10.43 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 2230 IR counterfeit detector | $229.95 |
1 x Cutting Wheels for ARC & TE **For black cutting head only** | $135.00 |
1 x Switch | $25.14 |
1 x Aluminum Banner Clip | $66.00 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |