|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
TBD - MOTOR IL -9/12 $0.00 |
![]() BookletMac Booklet Maker $2,069.00 |
![]() Standard AccuBind Pro Tape Binder $0.00 |
![]() Peach 330R 13" Pouch Laminator $0.00 |
RELAY, 115VAC $0.00 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x SWITCH ACTUATOR, IS127020 | $229.18 |
1 x O-RING DRIVE BELT-CC2700 | $43.98 |
1 x HR 3800 Take Up Roller | $299.00 |
1 x Ceiling Grid Squeeze Clips | $21.50 |
1 x THERMAL FUSE #K-356-236 | $182.62 |
1 x ROLL CUTTER BLADE 810500018 | $23.68 |
1 x Simplex 124" Cutter Bar (SIM310) | $898.20 |
1 x James Burns Lhermite EB3500 14" Electric Wire Closer | $6,209.00 |
1 x 5" Easel Backs | $29.95 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x Bolt - DISCONTINUED | $41.63 |
1 x PS-10 Rotary Crash Numbering Machine | $16,950.00 |
2 x VersaBind-Ei Electric Punch and Binding Machine | $4,798.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x Dura Wire 450 Manual Wire Closer | $349.00 |
1 x ONYX HD8370 Semi-Automatic Wire Closer | $1,729.00 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x MAGNA EDGE GUIDE KIT | $82.92 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Large Loop Head Adhesive Buttons | $99.00 |
1 x SHIM RING (PACMASTER | $79.58 |
1 x 755 RW BUMPERS | $3.68 |
1 x 57MM CORE- TITAN 810500081 | $23.68 |
1 x Hoerauf 135A Top Left Cutting Knife | $354.00 |
1 x 1/2" Aluminum Screw Posts | $17.02 |
1 x FUSE 1/2 AMP | $20.52 |
1 x 3/8" Type HO-3/8 staples | $6.05 |
1 x 122-TOOTH DRIVE GEAR | $194.58 |
1 x WirePro Advantage Wire Binding Machine | $259.00 |
1 x DRIVEN NIP ROLER SHAFT DISCONTINUED | $236.75 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |