|
Make your HD Punch more productive by getting the APES-14! APES stands for Automatic Paper Ejector &Stacker module. With your Rhin-O-Tuff HD punch it will punch, eject and stack in one operation. The APES-14 easily attaches to your HD6500 or HD7000 and handles paper sizes from 5 1/2" X 5 1/2" up to 14" X 14" (140 X 140mm to 356 X 356mm). For the occasional job that it can’t handle you can use your HD Punch in standard mode while the APES-14 is still attached.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Binds Books Up To: | None inches |
Shipping Weight: | 58 Pounds |
Super Pad Pro Padding Press $699.00 |
Martin Yale W15 15" Paper Cutting $189.00 |
Onyx HD7700 Ultima Punch For Wire, $4,634.00 |
Renz SRW 360 Modular Drive Motor $1,781.00 |
Onyx HD7000 Comb, Wire, & Spiral $3,604.00 |
1 x NX Snap Rail End Cap | $39.50 |
1 x SPACER, BEARING | $22.10 |
1 x FP1(B) Mega Duty Hole Punch | $219.00 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x Campeador S72SAP Cutter Knife | $420.00 |
1 x Wire Unit/AF-100 | $32.37 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x MBM Triumph 6660 Programmable Automatic Stack Cutter | $19,599.00 |
1 x Snap-apart Spiral Sign Holder | $139.50 |
1 x SHAFT, CORE, ORCA IV | $3,253.19 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x Photo Interrupter-Back Jogger Section | $31.05 |
1 x BLOCK WEAR PAD | $9.77 |
1 x Model 139 Stock Truck DISCONTINUED | $620.00 |
1 x 16" Knife Guard | $32.00 |
1 x Flat Belt/AF-100 | $45.41 |
1 x 13.5" Knife Guard | $27.00 |
1 x 12" Knife Guard | $24.00 |
1 x SWITCH BAR | $36.49 |
1 x Big Bench Xtra for 64" Javelin Xtra & Series 2 | $774.00 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x ASY SOLDER CTR. RECTIFIER | $60.58 |
1 x BUSINESS CARS (10 MI | $90.92 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x 14.5" Knife Guard | $29.00 |
1 x 24" Knife Guard | $48.00 |
1 x Model 126 Stock Truck DISCONTINUED | $500.00 |
1 x 19" Knife Guard | $38.00 |
1 x NONSTK-ELBOW MALE SWIVEL1/4 TO 1/8NPT | $60.78 |
2 x Triumph 3900 Cutting Knife | $456.00 |
1 x 22" Knife Guard | $44.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x 21" Knife Guard | $42.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x 22.5" Knife Guard | $45.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Zippy Cutter | $9.95 |
1 x Roll Laminator Cleaning Kit | $62.95 |