|
THE ONYX 4000PLUS HAS BEEN DISCONTINUED - IT WAS REPLACED BY THE ONYX OD4012 - PLEASE SEE THIS LINK:
https://www.adss.net/CoilBindingMachines/Onyx-OD4012Heavy-Duty-Electric-Interchangeable-Die-Punch-C22_31-p67891.htm
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
Triumph 5210 Cutting Knife $259.00 |
Minikote 27" Roll Laminator $1,689.00 |
Keencut 60533 $0.00 |
8" Hand Sealer with Cutter $99.95 |
Lightweight Wall Mount Business $14.95 |
1 x REGULATOR W1000-8N | $203.24 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x Side Glue Pellets for DB-290 Perfect Binder | $139.00 |
1 x Led PWB Unit | $33.83 |
1 x HOOK-COIL HOLE FTBFT | $73.51 |
1 x ROLL-MN DRV FOLD 53007-002 | $2,631.05 |
1 x NIP,8500 | $8,261.20 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x HOOK-COIL HOLE FTDFT | $73.39 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x Tungsten Carbide Glass Cutting Wheel for 63" Excalibur Series | $18.00 |
1 x TABLE END PANEL | $217.90 |
1 x Itoh 100 Cutting Knife | $1,062.00 |
1 x FITTING 90DEG 1/4NPTM 5/32TUBE | $38.89 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x BRASS CONNECTOR, HTR.WIRE | $48.66 |
1 x Minipad 4000 Padding Press | $199.00 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x DISCONTINUED Evolution E2 144" Cutter | $2,200.50 |
1 x Rosback 250 Bottom Front Cutting Knife | $170.00 |
1 x STEPPER DRIVE BD 4VSFR001 | $4,488.18 |
1 x TENSIONER SHAFT, S01 | $86.48 |
1 x D/FEEDER TENSION BUSH(PL) | $34.64 |
1 x Clutch Unit | $92.91 |
1 x 16" Bag Sealer with Cutter | $119.95 |
1 x Roller, Triple Envelope Hopper | $132.73 |