|
THE ONYX 4000PLUS HAS BEEN DISCONTINUED - IT WAS REPLACED BY THE ONYX OD4012 - PLEASE SEE THIS LINK:
https://www.adss.net/CoilBindingMachines/Onyx-OD4012Heavy-Duty-Electric-Interchangeable-Die-Punch-C22_31-p67891.htm
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
![]() Versalam-2700 HC Roll Laminator $3,999.00 |
![]() 11/32" Lawson / Miller HFD / Baum $29.79 |
![]() Big Bench Xtra for 64" Javelin $774.00 |
![]() Utility Blades $38.43 |
![]() 25"x250' 10 mil Digikote Gloss $327.00 |
1 x CLAMP HANDLE 1GLV0019701AA | $132.95 |
1 x BRSHLSS DC GEARMOT >USE 1722899 | $7,641.97 |
1 x Paper Sensor Unit/DF-755 | $49.48 |
1 x BEARING 5210-031 | $22.10 |
1 x HEAT SWITCH #27-800PL(USI#3211 | $81.40 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $744.00 |
1 x Metal Loop Hangers | $59.50 |
1 x PTOPIC FILM SHAFT BRAKE BLOCK | $83.59 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x Phoenix 2700-DHP Dual Heat Laminator — Production Model | $2,549.00 |
1 x Versalam-2700 HC Roll Laminator | $3,999.00 |
1 x Digital 60 Wide Format Laminator | $18,999.00 |
1 x 32" I Bar Shrink Wrap Sealer | $449.00 |
1 x Camco Big 3 Top Side (12") Cutter Knife | $156.00 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x DRIVE BELT | $16.70 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x 14" I-Bar Shrink Wrap Sealer | $355.00 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x LEVER | $25.65 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x PLASTIC INSERT F/D00R | $10.66 |
1 x TCC 2700 27" Roll Laminator | $1,625.00 |
1 x GUIDE BRACKET LEFT-DISCONTINUED | $48.44 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x CONTACT BLOCK NC E-1839-8 | $220.73 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x 442 Premium Roller Trimmer | $339.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x Wohlenberg 115 Cutting Sticks | $122.00 |