|
The GBC CombBind C75 is a small light duty comb binding machine that's perfect for Home & Small Office use. It punches up to 10 sheets of 20 lb. paper at one time and can bind up to a 120 sheet book which is about 7/16" thick and would use a 9/16" comb to bind it. With the C75 CombBind you can punch letter (8 1/2" x 11) and A4 (8.3" × 11.7") sized documents with the U-shaped handle increasing leverage and making it easier to punch while also letting right handed and left handed people get a good grip.
The GBC CombBind C75 Comb Binding machine uses standard Plastic Comb Binding Supplies. The comb binding machine takes up little space and weighs 10 lbs, it comes with suction cup feet to stabilize it while punching and binding.
Maximum Punch Capacity: | 10 20# sheets |
Maximum Paper Size: | 11.8 inches |
Construction: | Plastic |
Punch Type: | Manual |
Disengageable Punch Pins: | No |
Adjustable Hole Depth: | No |
Binds Books Up To: | 0.4375 inches |
Warranty: | 1 Year |
Power: | Manual |
Shipping Weight: | 12 Pounds |
![]() FC114 Frankencreaser Digital $11,607.00 |
![]() Onyx PAL-M Picks-A-Lift Manual $959.00 |
![]() RENZ TC-20 Thumb Cut Paper $189.00 |
![]() Onyx 3 in 1 PPS $10,370.00 |
![]() Martin Yale W30 30" Paper Cutting $559.00 |
1 x NX Snap Rail End Cap | $39.50 |
1 x SPACER, BEARING | $22.10 |
1 x FP1(B) Mega Duty Hole Punch | $219.00 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x Campeador S72SAP Cutter Knife | $420.00 |
1 x Wire Unit/AF-100 | $32.37 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x MBM Triumph 6660 Programmable Automatic Stack Cutter | $19,599.00 |
1 x Snap-apart Spiral Sign Holder | $139.50 |
1 x SHAFT, CORE, ORCA IV | $3,253.19 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x Photo Interrupter-Back Jogger Section | $31.05 |
1 x BLOCK WEAR PAD | $9.77 |
1 x Model 139 Stock Truck DISCONTINUED | $620.00 |
1 x 16" Knife Guard | $32.00 |
1 x Flat Belt/AF-100 | $45.41 |
1 x 13.5" Knife Guard | $27.00 |
1 x 12" Knife Guard | $24.00 |
1 x SWITCH BAR | $36.49 |
1 x Big Bench Xtra for 64" Javelin Xtra & Series 2 | $774.00 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x ASY SOLDER CTR. RECTIFIER | $60.58 |
1 x BUSINESS CARS (10 MI | $90.92 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x 14.5" Knife Guard | $29.00 |
1 x 24" Knife Guard | $48.00 |
1 x Model 126 Stock Truck DISCONTINUED | $500.00 |
1 x 19" Knife Guard | $38.00 |
1 x NONSTK-ELBOW MALE SWIVEL1/4 TO 1/8NPT | $60.78 |
2 x Triumph 3900 Cutting Knife | $456.00 |
1 x 22" Knife Guard | $44.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x 21" Knife Guard | $42.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x 22.5" Knife Guard | $45.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Zippy Cutter | $9.95 |
1 x Roll Laminator Cleaning Kit | $62.95 |