|
The GBC CombBind C75 is a small light duty comb binding machine that's perfect for Home & Small Office use. It punches up to 10 sheets of 20 lb. paper at one time and can bind up to a 120 sheet book which is about 7/16" thick and would use a 9/16" comb to bind it. With the C75 CombBind you can punch letter (8 1/2" x 11) and A4 (8.3" × 11.7") sized documents with the U-shaped handle increasing leverage and making it easier to punch while also letting right handed and left handed people get a good grip.
The GBC CombBind C75 Comb Binding machine uses standard Plastic Comb Binding Supplies. The comb binding machine takes up little space and weighs 10 lbs, it comes with suction cup feet to stabilize it while punching and binding.
Maximum Punch Capacity: | 10 20# sheets |
Maximum Paper Size: | 11.8 inches |
Construction: | Plastic |
Punch Type: | Manual |
Disengageable Punch Pins: | No |
Adjustable Hole Depth: | No |
Binds Books Up To: | 0.4375 inches |
Warranty: | 1 Year |
Power: | Manual |
Shipping Weight: | 12 Pounds |
Black Loop Head Adhesive Buttons $25.95 |
200" Big Bench Table $1,777.50 |
Clamp Pads $57.95 |
VersaBind-E Electric Punch and $1,799.00 |
BAG FULL MICROSWITCH ASSEMBLY $0.00 |
1 x REGULATOR W1000-8N | $203.24 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x Side Glue Pellets for DB-290 Perfect Binder | $139.00 |
1 x Led PWB Unit | $33.83 |
1 x HOOK-COIL HOLE FTBFT | $73.51 |
1 x ROLL-MN DRV FOLD 53007-002 | $2,631.05 |
1 x NIP,8500 | $8,261.20 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x HOOK-COIL HOLE FTDFT | $73.39 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x Tungsten Carbide Glass Cutting Wheel for 63" Excalibur Series | $18.00 |
1 x TABLE END PANEL | $217.90 |
1 x Itoh 100 Cutting Knife | $1,062.00 |
1 x FITTING 90DEG 1/4NPTM 5/32TUBE | $38.89 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x BRASS CONNECTOR, HTR.WIRE | $48.66 |
1 x Minipad 4000 Padding Press | $199.00 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x DISCONTINUED Evolution E2 144" Cutter | $2,200.50 |
1 x Rosback 250 Bottom Front Cutting Knife | $170.00 |
1 x STEPPER DRIVE BD 4VSFR001 | $4,488.18 |
1 x TENSIONER SHAFT, S01 | $86.48 |
1 x D/FEEDER TENSION BUSH(PL) | $34.64 |
1 x Clutch Unit | $92.91 |
1 x 16" Bag Sealer with Cutter | $119.95 |
1 x Roller, Triple Envelope Hopper | $132.73 |
1 x Unit Power/Motor BD/=7A1-21670 | $1,061.33 |
1 x CONV BELT 14.95 DISCONTINUED | $927.98 |
1 x CONV BELT 14.95 DISCONTINUED
This product has been added to your cart.
For more information, click on the Cart button at the top of the page.