|
The CBX 100 Automatic Punching Machine can punch up to 100 sheets at one time (20 lb. Round Hole). It can be easily changed to punch documents in patterns for Coil, Wire, Comb and many more.
Maximum Punch Capacity: | 100 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 1 |
Power: | 110/220/230 VAC x 1 Phase, 750 Watts |
Size: | 20" W x 20.24" D x 21.65" H |
HeatSeal Sprint H950 Fully $0.00 |
SkyLab Model 435 Table Top Three $0.00 |
Roll Laminators - Finisher 27 $0.00 |
Booklet Mate Booklet Maker $679.00 |
Xyron MLAT1251-100 $0.00 |
1 x 4705 18-3/4 Inch Manual Paper Cutter | $3,639.00 |
1 x 2A SLO BLO FUSE 3AG | $21.18 |
1 x GUARD, IDLER | $489.43 |
1 x RUBBER WHEEL 96V-22100 | $111.50 |
1 x HEATER, 220V AD | $610.92 |
1 x SPRING,L/H CI-12 >USE 0320108200 | $53.44 |
1 x NONSTK-KNOB - PULL CI12-32 | $193.05 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x Campeador S72SAP Cutter Knife | $420.00 |
1 x DISCONTINUED GRAPHIC LCM DISPLAY | $1,499.70 |
1 x Versalam-2700 HC Roll Laminator | $3,999.00 |
1 x T/S & FORM BASE | $377.00 |
1 x HEATER INCOLOY EIN2277 | $435.63 |
1 x FORM BELT BRACKET | $21.97 |
1 x OFF-SET ARM ASSY. | $310.81 |
1 x AUTOFEED WHEEL AA1462 FF22 | $88.50 |
1 x ACTUATOR BRACKET,IM >USE 7700298 | $50.40 |
1 x Clamp Pads | $57.95 |
1 x BRACKET, TRAVERSE CLAMP MTG | $1,650.40 |
1 x Paper Size Plate | $8.24 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x T80 Thermal Binder | $529.00 |
1 x Clamp Assembly | $47.75 |
1 x Minikote EZ 27" Roll Laminator | $1,398.00 |
1 x Sponge Roller DP-2050/205/205A | $81.11 |
1 x LATCH, SPRING | $68.08 |
1 x DocuGem R1800 18" Paper Cutter | $1,900.00 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |
1 x PH1250M 12.5" Manual Stack Cutter | $395.00 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x REGULATOR W1000-8N | $203.24 |