|
The spirals are easily inserted into the pre-punched book by means of an electrical drive. The integrated spiral cutting and crimping unit perfectly cuts and crimps the plastic spiral ends. Metal spirals can be cut using a SC-pliers.
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Manual |
Disengageable Punch Pins: | Yes for A4 and A5 |
Adjustable Hole Depth: | No |
Binds Books Up To: | 0.7 inches |
Warranty: | 1 |
Power: | 230V / 50 Hz |
Size: | 14.2" L x 19.3 W x 9.8" H |
Shipping Weight: | 45 Pounds |
![]() Onyx HD7700 Ultima Punch For Wire, $4,634.00 |
![]() CoilPro 2000 EPI Coil Binding $1,799.00 |
![]() FlexiPunch-M Heavy-Duty Manual $479.00 |
![]() Onyx PAL-M Picks-A-Lift Manual $959.00 |
![]() Count Repeat Selector Kit 8 Wheel $65.63 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 36" Extended Measuring Arm for the Sabre Series Cutters | $162.00 |
1 x PUSH-BUTTON KNIFE & CLAMP | $71.57 |
1 x ENVELOPE EXCITER | $12.22 |
1 x PULLEY-GEAR COMBO-ON 1611 LIN | $17.92 |
1 x 1/4" Push-to-Lock Loop Screws | $19.25 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Plastic Luggage Strap | $19.95 |
1 x 60954 Evolution 2 Bench for the 144" Evolution E2 | $1,296.00 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x MBM iBooklet Tabletop Booklet Maker | $1,883.00 |
1 x SET OF CUTTERS | $4,633.32 |
1 x RUBBER BRG | $16.87 |
1 x Car adaptor for Cassida products | $78.95 |
1 x White Silicone Cord for the Sabre Series Cutters | $40.50 |
1 x LEFT BEARING PLATE ASSY 120 | $86.18 |
1 x Belt, Slitting Transport/BCC-228 | $33.93 |
1 x TENSION SPRING | $24.36 |
1 x ASY 2ND FOLD PLATE | $977.20 |
1 x MARK VII MOTOR WIRE ASSEMBLY | $348.60 |