|
Plastic spiral coils are easily inserted into the punched book. The integrated spiral cutting and crimping unit perfectly cuts and crimps the plastic spiral coil. Metal spirals can be cut, using SC-pliers.
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | For A4 and A5 |
Adjustable Hole Depth: | No |
Binds Books Up To: | 0.7 inches |
Warranty: | 1 |
Power: | 110 V |
Size: | 17.3" L x 19.3" W x 29.8" H |
![]() Onyx HD7000 Comb, Wire, & Spiral $3,604.00 |
![]() 1/4" Colored Aluminum Screw Posts $12.85 |
![]() FC114-A Frankencreaser Digital $17,740.00 |
![]() BCS410 Business Card Slitter $2,310.00 |
![]() FP 1XLS Heavy Duty Hole Punch $349.00 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x Passport Die Cutter | $105.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x Challenge 37TCM Cutting Knife | $416.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x CAP12 UF 400 V 047680013 | $55.65 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Shelf Push Pins | $49.50 |
1 x VBF 135A Top Front Cutting Knife | $354.00 |
1 x FORM CHUTE TOP | $73.38 |
1 x ID Photo Die Cutter | $289.00 |
1 x ANVIL F/AUTOBOOKLETMAKER | $49.62 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x DIN7991 HEX SOCKET H | $10.01 |
1 x Removable Strap Clip | $15.95 |
1 x 1/4 HAIRPIN CLIP | $4.10 |
1 x PCB 115 V | $410.01 |
1 x D842 16-7/8" Heavy Duty Manual Paper Cutter | $1,279.00 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x DISCONTINUED ROD,NIP GUIDE | $266.40 |
1 x Spring handle | $21.03 |
1 x Book Clamps | $39.95 |
1 x IDLER, SIDE GUIDE BELT | $1,014.01 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x ASY TOP GUIDE | $69.30 |
1 x Sprint 3000 Booklet Maker | $8,599.00 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x BookletMac Booklet Maker | $2,069.00 |
1 x 20002255018 ADJ ARM | $29.86 |
1 x DISCONTINUED PLATE, UPPER STACKER | $344.76 |