|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
![]() SkyLab Model 435 Table Top Three $0.00 |
![]() Keencut 54" Advanced Rotary Cutter $535.50 |
![]() PBS Combo Spiral Plastic Coil $0.00 |
![]() Table Top Slot Punch with Guide $27.95 |
![]() PF-P320 Paper Folder $4,495.00 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x DISCONTINUED Evolution E2 84" Cutter | $1,674.00 |
1 x MAIN CHARGE WIRE SUP9810-104 | $106.02 |
1 x 2" Loose Leaf Rings | $35.57 |
1 x Idler | $15.73 |
1 x GEAR 6 Z051600360 | $65.78 |
1 x Camco Big 3 (16") Cutter Knife | $186.00 |
1 x SCR.,MACH.,CH.,HD.,M3x8 | $22.55 |
1 x SPROCKET, 24 TOOTH 1108 BORE | $208.18 |
1 x 20002255018 ADJ ARM | $29.86 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Sprint 5000 Booklet Maker | $9,399.00 |
1 x HS-3000-GC Gutter Cut Business Card Slitter DISCONTINUED | $3,995.00 |
1 x Horizon HT-70 Cutting Knife | $306.00 |
1 x Stahl 135A Top Right Cutting Knife | $354.00 |
1 x C/OFF MOT CPLG DISCONTINUED | $26.46 |
1 x EXP 62" Plus Laminator | $12,095.00 |
1 x BAG FULL FLAP >USE 10145880010A | $22.10 |
1 x Flat Belt/DC615 | $66.27 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x Micro Switch/DC-645 | $41.63 |
1 x Camco 250 (16") Cutter Knife | $186.00 |
1 x DISCONTINUED THERMOSTAT | $77.14 |
1 x OBSOLETE FUSE HOLDER | $32.79 |
1 x Stand, Waste Catcher & Roll Feeder for 60" ARC 60609 | $792.00 |
1 x EXP 42/62 Foot Pedal | $126.00 |