|
The HD7700 Ultima is the top of the line heavy duty durable Table Top Punch that has no equal. Combining the Rhin-O-Tuff patented Quick Change Die System with the following exciting new features:
EACH DIE IS SOLD SEPARATELY
With these new features plus a 3 year warranty along with all of the standard features below, the HD7700 Ultima will handle any size project, large or small. Designed for high volume commercial and corporate use.
Maximum Punch Capacity: | 55 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | All |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts AC / 4 AMPS / 60 Hz |
Size: | 9" H x 23" W x 23" D |
Shipping Weight: | 88 Pounds |
![]() 1/5 Cut Single Reverse Printable $125.00 |
![]() Rhin-O-Tuff Coil Binding System $1,649.00 |
![]() Triumph 4305 Manual Paper Cutter $2,496.00 |
![]() CBX-100 Automatic Heavy Duty $5,795.00 |
![]() Onyx APES-14 Automatic Paper $3,799.00 |
1 x PowerHouse PF17 Paper Folder | $999.00 |
1 x Graphik D .017 Blades | $82.80 |
1 x Duplo DF 920 Paper Folder DISCONTINUED | $5,300.00 |
1 x Replacement 28mm Fabric Cutting Wheels | $117.00 |
1 x Scoring Blade for Acrylic | $25.00 |
1 x Ideal/MBM 508A Automatic Folder | $6,399.00 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x RM-12/2 (12") Cutting Mat (2 Pack) | $11.29 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $697.50 |
1 x Multicut 10/710 Cutting Knife | $430.00 |
1 x Excalibur 3S Utility Cutter | $3,800.00 |
1 x SAW REAR TOWER RAIL | $40.93 |
1 x Staplex SU-100N Ultra Heavy Capacity Electric Stapler | $995.00 |
1 x 90007265065 END CAP 40X40 | $22.10 |
1 x Multicut 10/720 Cutting Knife | $430.00 |
1 x Roll Laminator Cart | $469.00 |
1 x Type A Hollow Drill Sharpener | $129.00 |
1 x Speedy-Lam 330R-10 10 Roller Pouch Laminator | $1,295.00 |
1 x FLAT BELT DBM-500-12J-36260 DISCONTINUED | $99.59 |
1 x P/C CATCH TRAY-ON 1611 LINE DISCONTINUED D | $36.00 |
1 x HOLE COVER STICKER(LOW) | $23.68 |
1 x SteelTraK 65" Utility Cutter | $5,060.00 |
1 x EXIT TRAY P/C | $39.60 |
1 x Roll Laminating Workstation | $279.00 |
1 x TIMING PULLEY-6DTBM184 | $208.07 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x Pouch Laminating Workstation | $219.00 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x FORM BELT BRACKET | $21.97 |